1992-1996 Bronco Prothane Front Sway Bar & End Link Bushing Kit - 7/8" by Prothane

Improve the handling and reduce excessive bushing play on your 1992-1996 Ford Bronco with this 7/8" Prothane sway bar and end link bushings kit!

Item #PT-61104BL
MPN# 6-1104-BL

Everyday Low Price: $39.99

In Stock Ships tomorrow!

This item is returnable. Details

Free Shipping over $99

Add to Cart

Add to Wishlist

Ford Bronco - 1992, 1993, 1994, 1995, 1996

Fitment Notice

To verify proper fitment, you must measure your sway bar before ordering! This can be accomplished by using a dial caliper or by tightening an adjustable "crescent" wrench on the sway bay and using a measuring tape/ruler to measure the distance between the jaws of the wrench.

Bushing Lubrication Note

The suspension bushings included can only be lubricated with the included PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is waterproof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. The use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.

Benefits

Long Service Life
Improves Handling
Reduces Deflection

Features

Black Polyurethane Construction
Oil & Temperature Resistant
7/8 Inch Size

What's in the Box

(2) Front Sway Bar Bushings
(1) Packet Of Bushing Grease
(8) Sway Bar End Link Bushings
(2) Sway Bar End Link Spacer

Prothane Front Sway Bar & End Link Bushing Kit - 7/8"

Restore and improve the handling of your 1992-1996 Bronco with this 7/8" Prothane sway bar and end link bushing kit. Nothing is worse than driving down the road and hitting a bump to hear your sway bar clanking around due to failed bushings. Featuring an extremely durable polyurethane construction, the bushings included in this kit will improve steering response, withstand harsh exterior elements, and reduce deflection to control sway bar movement. The included sway bar bushings are designed to fit a 7/8" sway bar on the front of your OBS truck. Also included are brand new sway bar end link bushings to further reduce flex and rattles from failed bushings.

Prothane Quality

Prothane's polyurethane bushings are firm enough to control movement and maintain alignment in sway bars, control arms, and other stressed suspension components without the harshness or resonance associated with solid metal suspension bushings. After the installation of these bushings, it will be easy to experience the precise steering, road feedback, and added firmness that Prothane bushings offer!

Prothane Warranty - Click Here

1992-1996 Ford Bronco Suspension Lift Guide

Published 3/3/23
1992-1996 Bronco Suspension and Steering Torque Spec Guide

Published 3/16/23

California Residents:

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

About This Brand

Lifted or lowered suspensions, increases in horsepower, plus-size wheels and tires can subject traditional rubber suspension bushings to forces beyond their limits. Control arms, strut arms, leaf springs, body mounts, motor mounts, transmission mounts, sway bars and shocks all control movement and maintain alignment but the rubber bushings they use are designed for more "middle of the road" use. Rubber also deteriorates over time, further reducing control. This contributes to premature component failure, a "spongy" ride and less than ideal performance handling. Urethane bushings can correct these conditions, and improve drivability in your Mustang or Ford Lightning.