Benefits
- Easily adjust to work with C4 transmissions.
- Allows More Exhaust Clearance Than OEM
- Adds Stiffness and Strength
Features
- Single Tube Design for Maximum Stiffness Without Excess Weight.
- Engineered to Maintain Pinion Angle
- Supplied with Polyurethane Bushings
What's in the Box
- (1) Transmission Crossmember
- (1) Attaching Hardware
- Instructions
Tubular Transmission Crossmember
Here's it is, a direct fit for upgrading your 1982-1993 Fox Mustang to a C4 transmission. This unique single tube design adds stiffness and strength far beyond that of the OEM versions while offering versatility like no other. Simply slide the mounting sleeves and re-position the spacers to cover your C4 application. The crossmember is engineered to work with OEM and aftermarket transmission mounts; all while maintaining your current pinion angle. Low deflection polyurethane bushings are used in the mounts to dampen driveline vibrations and noise. For racing applications the polyurethane bushings can be replaced by solid bushings.
Fitment Note
If used with a toploader transmission, additional/removal of supplied shims may be required depending on the driveline angle.
Application
Fits 1982-1993 Ford Mustang w/ C4 or Powerglide Transmission
Powerglide will need STF-TMM02 to compete the installation
Not sure if this is the right crossmember for you? Check out Stifflers' application guide!
Stifflers Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
