(1) Set of Factory bent 3/8" stainless steel supply lines.
(1) Stainless steel Return Line
Fuel Up Your High Horsepower Motor
This 1986-1993 Mustang SVE high performance fuel line kit w/ fuel pump is a great way to feed more gas into your motor. When making more power in your Fox Body, you are going to need a good fuel supply to keep your power constant. This kit includes a new E-85 compatible Aeromotive fuel pump, new fuel pump hanger with 3/8" supply feed & factory bent 3/8" stainless steel supply lines. It also uses factory connection point for an easy installation. This is a great upgrade for Foxbody owners who have increased horsepower and need a better fuel supply. Pick up this kit to get your 5.0 running smoothly again.
Aeromotive 340 Stealth Fuel Pump
These Aeromotive 340 Stealth electric fuel pumps feature a compact, lightweight design that will bolt into most existing hanger assemblies. The 340 Stealth electric fuel pumps boast an impressive 340 lph flow at 40 psi. They are ideal for applications requiring more flow, while retaining the factory wiring and mounting provisions available in the OEM configuration. The Aeromotive 340 Stealth electric fuel pumps use a turbine pump mechanism that increases durability and can be used in pulse modulated applications. These pumps use a 3-inlet configuration that covers a wide range of vehicles. They also run reverse polarity, so they require the use of the included wiring harness for proper installation. The fuel pumps also include a 5/16 in. section of rubber hose and hose clamps. This fuel pump is now E-85 compatible!
All parts quality is top notch, but kit does NOT come with new hanging clips (and most of the clips on the original fuel lines will not work. Instructions on setting up the Aeromotive pump with the Spectra hanger are not clear- DON'T PUT THE RUBBER ISOLATOR on the pump- there is a vent on the bottom of the pump that must not be blocked. You have to cut and crimp the wires because the hanger has it's own wires and they don't match up to the Aeromotive harness- this is disheartening because the Aeromotive harness is much better quality.
Now for the fun part... I don't care what anyone says, these things DO HAVE TO come off the car for proper install: Cat Back- all of it, H-Pipe, driveshaft, passenger side front suspension has to be partially pulled apart and brake lines hanger unbolted to avoid causing any crimps in the new fuel lines during install. If you have WELD IN SUBFRAME connectors and the original fuel line runs between it and the bottom of the car... CUT! I had to take a 6 in section out (I'll add it back later)
Now, I'm off to Home Depot to try to find new clips to make work. Not a happy camper that the "Kit" doesn't include these for $600. My recommendation if you are not trying to do a factory aesthetically correct upgrade, just do -AN fittings and braided hose. Probably save a couple of hundred that way too and have it done in a couple of hours.
For all the best in SVE Mustang parts for your Fox Body, New Edge, or SN95 Stang, make Late Model Restoration your source. Shop now for performance parts.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.