Benefits
- Replaces Weak Factory Alternator
- Increased Amperage Output
- Internally Regulated
- SVE Quality
Features
- Brand New Alternator
- 4 GA Power Cable
- 200 AMP Output
- Black Finish
What's in the Box
- (1) 200 Amp Alternator
- (1) Power Wire Upgrade
SVE Lightning 200 Amp Alternator Kit - BlackThis black Special Vehicle Equipment® 200 amp alternator upgrade kit gives your 1993-1995 F-150 SVT Lightning more charging power for your accessories! Lightning's stock alternators suffer from small wiring and low output. Add underdrive pulleys and run your accessories such as headlights, A/C, or the heat, and you'll likely see the lights dim and the battery gauge drop. Our 200 amp SVE alternator is 100% brand new, has no core charge, and carries a Limited Lifetime Warranty. This alternator is from the internally regulated 3G series, includes the correct pulley (installed), and produces 75-100 amps at idle when used with the stock crank pulley and the installed alternator pulley. The idle output of the SVE alternator meets or exceeds the peak output of the stock alternator! A durable black powder coating is applied to the case to give it a great look.
Why Buy An SVE Alternator?
- More Powerful Than OEM - Upgrade to this SVE 200 Amp 3G Alternator Kit to get a more powerful alternator that produces more amps through the RPM range, exceeding the peak output of the stock alternator.
- Designed With Performance & Comfort In Mind - This SVE 1993-1995 Lightning alternator was designed to replace and upgrade your factory alternator to get your Lightning charging system updated.
- Tested & Trusted By Mustang Enthusiasts - As one of our most popular Lightning alternators, this Special Vehicle Equipment (SVE) 200 amp alternator has quickly grown to be a customer favorite.
- Complete Wiring Solution - The OEM wire was not designed to carry the added load of higher amp alternators, an upgraded 4-Gauge main power feed wire, and conversion wiring completes the install.
4 Gauge Power Wire UpgradeThis kit includes a complete upgrade to the main power feed wire from the alternator to the vehicle. The OEM wire from the alternator to the vehicle was not designed to carry the added load of higher amperage alternators. Featuring heavy-duty, #4 gauge wire, this power wire can handle any 170 or 200-amp alternator! Thirty inches of wire and a 200 amp fuse are included, so you can cut to fit your specific application! When using our high-output alternators, you MUST upgrade this cable to retain warranty coverage. It also includes noise suppression for aftermarket radios.
Pulley Size- Pulley Diameter 2.55" (64.80mm)
SVE Products Limited Warranty - Click Here