1999-2002 SVT Lightning SVE 2 Row Aluminum Radiator by SVE Special Vehicle Equipment ®

SVE Aluminum Radiator
Overhaul the cooling system in your 1999-2002 SVT Lightning with this premium SVE 2 row aluminum radiator! From the factory, your Lightning was equipped with a very thin radiator that utilized plastic end tanks. After years of heat cycles and track day abuse, these end tanks tend to crack, causing coolant leaks. To eliminate this issue, SVE has designed a 100% aluminum radiator that improves heat dissipation to increase efficiency, ultimately keeping your engine temperatures low on and off the track! This SVE radiator is a direct bolt-on that will install quickly to replace any clogged, leaking, or damaged factory radiator.

SVE Quality
SVE's aluminum radiator features a triple-core, cross-flow design that improves the coolant flow over your factory radiator. The 2-row design and all-aluminum tanks increase coolant capacity to ensure your Supercharged Sport Truck is running cool at all times. Beautiful TIG welds flow across all seams of the radiator to ensure leak-free performance that lasts. High-efficiency air fins allow maximum airflow in any driving condition. A plastic drain plug with a rubber o-ring is included for easy servicing. Factory-size inlets and outlets are utilized to make this SVE radiator the perfect choice for your Lightning!

Why Upgrade To An Aluminum Radiator?
Factory Lightning radiators can become clogged, corroded, or inefficient over time. An upgraded aluminum radiator improves coolant flow, cooling efficiency, and long-term durability while helping maintain stable engine temperatures during aggressive driving conditions.

Why Buy An SVE Radiator?

• Superior Cooling Performance - The 2-row aluminum design maximizes coolant flow to keep your engine running cooler under any driving condition.
• Direct-Fit Reliability - Designed specifically for 1999-2002 SVT Lightnings.
• Durability You Can Trust - Constructed from 100% aluminum and pressure-tested for quality, it resists corrosion and lasts longer than stock units.

Proper maintenance of an aluminum radiator is essential for the longevity and efficiency of your vehicle's cooling system. Start by performing a complete flush of the entire cooling system, including all hoses and the engine block, to ensure it is free from old fluid or contaminants. Always refer to your user manual for the correct type of coolant and maintain a 50/50 mix of coolant and water. Failing to do this can lead to electrolysis, where electricity flows through the system, causing severe corrosion and pitting on the aluminum surfaces. To avoid this, regular maintenance every 30,000 miles is recommended, including flushing and inspecting the system. Additionally, NEVER use the radiator as a ground for electrical components, as this can accelerate electrolysis and lead to further damage.

SVE Products Limited Warranty - Click Here