Due to Hurricane Ian, shipments to certain areas in Florida and South Carolina may experience delays or suspended service. FedEx Service Disruptions
Replaces Worn Out Wires
Increased Fuel Economy
8mm Hi-Energy Performance Wires
High Temperature Blue Silicone
Oil Resistant Boots
Fits 1986-93 Ford Mustang 5.0/5.8L
What's in the Box
(1) Set of High-Energy 8mm Wires
(1) Set of Spare Wire Parts
High Energy Spark Plug Wires
Taylor’s 8mm Hi-Energy Series is a high temperature and oil resistant ignition wire. High-Temperature Blue 100% silicone Boot Ends with double spring locking spark plug terminals. Engineered to perform and last even in those high under-hood temperatures!
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-08-27 Follow along in the video as Jmac shows you just how easy it is to upgrade the spark plug wires in your Fox Body Mustang.
Are your Mustang Spark Plug Wires cracked and worn? Look no further than the Performance Distributors Livewire Plug Wires. Not only will you see an increase in performance but you can see improvements in fuel economy as well. They are a great way to finish off any ignition system upgrade.
SAVE TIME AND MONEY BY PURCHASING THE PDI MUSTANG IGNITION SYSTEM UPGRADE KIT: Features: * Mustang Livewire Plugwires * Mustang Screamin Demon Ignition Coil * Mustang Hot Forged Aluminum Distributor * Mustang Wire Looms by Taylor
Taylor - Where Performance Comes Down To The Wire
Taylor Cable Products is an OEM and Performance company that was built on its founding heritage supported by a tradition of legendary quality. Known as an innovative company since 1923, Taylor Cable has been setting the pace for EIGHT DECADES with quality products such as Performance Ignition Plug Wires, Wiring Harnesses, and other quality High Performance Ignition and Electrical Components and Accessories for your Mustang or Lightning. Shop Taylor products today at LatemodelRestoration.com and get your vehicle running smoothly again!
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Pattern
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.