SHOP

2005-14 Mustang Watson Racing 6 Point Chromoly Bolt-In Roll Bar - Gray by Watson Racing


2005-14 Mustang Watson Racing 6 Point Chromoly Bolt-In Roll Bar  - Gray
2005-14 Mustang Watson Racing 6 Point Chromoly Bolt-In Roll Bar  - Gray
2005-14 Mustang Watson Racing 6 Point Chromoly Bolt-In Roll Bar  - Gray
2005-14 Mustang Watson Racing 6 Point Chromoly Bolt-In Roll Bar  - Gray
2005-14 Mustang Watson Racing 6 Point Chromoly Bolt-In Roll Bar  - Gray
2005-14 Mustang Watson Racing 6 Point Chromoly Bolt-In Roll Bar  - Gray
2005-14 Mustang Watson Racing 6 Point Chromoly Bolt-In Roll Bar  - Gray
2005-14 Mustang Watson Racing 6 Point Chromoly Bolt-In Roll Bar  - Gray

Increase the stability of your 2005-2014 Mustang, while keeping yourself protected, with this Watson Racing 6 point bolt-in roll bar!

Item #WR-1976PTBOLTIN

Everyday Low Price: $1,638.89

Low Stock Only 2 available. Ships today!
 This item is not returnable. Details
 Truck Freight Item - Shipping calculated at checkout. Details

 Add to Cart

× close

  • Ford Mustang - 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Fitment Note 
  • Roll bar will NOT fit convertible.

 Benefits

  • Increases Chassis Strength
  • Provides Added Safety
  • Quicker Launches
  • Bolt-In Design
  • NHRA & NMRA Legal
  • Allows Full Seat Travel

 Features

  • Graphite Gray Powder Coat Finish
  • 6-Point Structure
  • Precision CNC Mandrel Bent
  • 100% TIG Welded
  • 1.625" Chromoly Steel Tubing
  • Shoulder Harness Retention Loops

 What's in the Box

  • (1) Roll Bar Main Hoop
  • (2) Left/Right Diagonal Bars
  • (2) Left/Right Door Bars
  • (2) Medium Square Sub-Floor Nut Plates
  • (2) Large Square Sub-Floor Nut Plates
  • (16) M10x1.5x25mm Zinc Flange Bolts
  • (4) Narrow M10 Nuts Plates
  • (8) M6x1.0x20 Zinc Socket-Head Bolts
  • (8) M6 Zinc Washers
  • (8) 1/8" Rivets

Watson Racing Roll Bar
Improve you and your passenger's safety while strengthening your S197 chassis with this 2005-2014 Mustang Watson Racing 6 point roll bar! Roll bars are one of the most important performance and safety devices when it comes to racing. Designed for the part-time racer that doesn't want a full-time roll bar, this roll bar is a bolt-in style bar with 6 points of contact. The Watson roll bar can be unbolted from inside your car for quick removal, and re-installation, anytime you want! Unlike other kits, you will not have to cut your interior trim panels if you do not want to. If you’d rather keep the trim panels and roll bar permanently mounted in the car, the modifications required to the trim panels are minimal.

Watson Racing Quality

Watson designed this roll bar to bolt directly into pre-existing holes in the factory, high-strength corner gussets. This leaves what Ford-engineered, and crash-tested, fully intact. Constructed with 100-percent TIG-welded 1.625" x .083"-wall 4130 Chromoly tubing, this bar has precision machined tube joints for high strength and safety! Watson Racing designed this kit to have as few bends as possible to maximize effectiveness and safety. Where bends are required, they used a precision CNC mandrel bending process to maintain strength. This roll bar comes in a graphite gray powder coat finish that's durable and blends nicely with your interior. Since this bar mounts on top of the factory corner gussets, the front seats are free to move back and forth to maintain a comfortable driving position.

Removable Door Bars
Watson designed the door bars in this kit to be completely removable. Instead of the typical single, quick-release pins; Watson utilizes an ultra-strong joint. This improves strength, where pin systems can fail, without sacrificing ease of getting in and out! Simply unbolt and remove the bar from inside.


Watson Racing Warranty - Click Here


California Residents:
Prop 65 Warning SignWARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
Ship Weight: 73 lbs

About This Brand


Watson Racing
Watson Racing specializes in late model Mustang racing parts and custom race car builds. Watson Racing is an affiliate of Watson Engineering Inc. Watson is very proud to be an integral part of the Ford Performance Racing Mustang S550, S197, Cobra Jet, Mustang Boss 302S and 302R racing builds. Previously road race, drag race, and street application racing parts were only available on new Drag Race or Boss 302 Mustang racing cars but now these parts are available from Watson Racing. Shop our selection of Mustang Watson Racing parts at LMR.com!
Add to Cart