94-04 Mustang Trunk Lift Strut Install

Posted 2/14/2013 by Jonathan McDonald

Help your trunk stay open and don’t let your trunk come crashing down on your hands or head! This easy installation repairs your faulty trunk lift supports. These are a direct replacement hydraulic shock that fits all 1994-04 coupe and convertible Mustangs. Installation will take you less than 10 minutes and best of all won’t break the bank! Follow along as we show just how easy it is to install a set!

FOLLOW: mustang , 94 04 mustang , sn95 , video , installation , tech , exterior , trunk

Installation Instructions

  1. Pry out on the Upper Clip with a Flat Blade Screw Driver

  2. Remove the Upper Pivot

  3. 94-04 Mustang Trunk Lift Strut Install - 94-04 Mustang Trunk Lift Strut Install

  4. Do the Same for the Lower Pivot

  5. 94-04 Mustang Trunk Lift Strut Install - 94-04 Mustang Trunk Lift Strut Install

  6. Slide your new Trunk Support Into Place
  7. Snap it Onto the Upper and Lower Pivot Ball

  8. 94-04 Mustang Trunk Lift Strut Install - 94-04 Mustang Trunk Lift Strut Install
    94-04 Mustang Trunk Lift Strut Install - 94-04 Mustang Trunk Lift Strut Install

  9. Move on to the other side. Repeat these same steps.

Comments


About the Video

Mustang Trunk Lift Support Strut Install (94-04)

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Published on 2013-02-14
Is your Mustang Trunk/Deck Lid not being held up by the trunk lid lift supports? Is your trunk lid determined to close on your hands every time you open it? LatemodelRestoration.com has the answer for you with these super simple to install new deck lid lift support struts. They install in less than 15 minutes and best of all the deck lid won't come crashing down on your hands or even worse your head.

Replace your 94-04 SN95 Mustang Trunk Lift Support Struts today!!

Fits the following year model Mustangs:
1994 (94) - 1995 (95) - 1996 (96) - 1997 (97) - 1998 (98) - 1999 (99) - 2000 (00) - 2001 (01) - 2002 (02) - 2003 (03) - 2004 (04)

Fits the following model Mustangs: GT, V6, Mach 1, Bullitt and Cobra
Transcript
If your '94 to '04 Mustang does this, you need new trunk lift supports.

Our reproduction trunk lift supports fit all '94 to '04 Mustangs, and installation is stupid simple. All you have to have is a small flat blade screwdriver.

To remove, take your small flat blade screwdriver. Pry out on the upper clip. Remove the upper pivot. And then do the same for the lower pivot.

Slide your new trunk support into place, snap it onto the pivot ball, and you're done. Move on to the other side. Repeat these same steps.

Now that is what's supposed to happen when you open your trunk. Now for more Mustang restorations and renewal parts, check out latemodelrestoration.com.