Powered by Mustang Enthusiasts - Call Now (866) 507-3786

How To Replace 1994-2004 Front Wheel Hub Assembly

Created by Jude Horstman
Last Updated 6/8/2022

Check out the steps needed to replace your 94-04 SN95 and New Edge Mustang Front Wheel Hub Assembly. Buy a new pair from LMR today!

Viewing this install and using the information shared is subject to the terms set forth here - View the LMR Install Instructions Disclaimer.

FOLLOW: 94 04 mustang , mustang

How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

In this replacement article, we will be showing you how to remove and install the Front Wheel Hub Assembly for all 1994-2004 Mustangs. Audible noises and steering wheel vibrations are good indicators your font wheel hub assembly needs to be replaced. These steps show you how to replace your SN95 or New Edge front wheel hub assembly and will have you back on the road in no time!

You can use this general removal on all 1994-2004 vehicles. Overall this one should take you roughly an hour to complete.

Tools Needed

  • Lift or jacks
  • Jack stands
  • 3/8" ratchet or impact
  • Assorted sockets
  • 36mm socket
  • Wrenches
  • Hammers
  • Pry bar
  • Brake Cleaner & Rags

Removal Steps

  1. To begin, support the front of the car via jack stands or the entire car with a lift.
  2. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  3. Remove the front wheel on the side that you are working on.
  4. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  5. Locate and remove the (2) 15mm bolts securing the caliper to the spindle.
  6. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  7. Use a pry bar to help remove the caliper from the rotor.
  8. Tech Tip: Use an old coat hanger or something similar and hang the caliper out of the way
  9. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  10. Remove the front rotor and set it aside carefully.
  11. Pry the dust cap off of the hub assembly.
  12. Loosen and remove the hub to spindle retaining nut with a 36mm socket.
  13. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  14. If needed, gently tap the backside of the hub with a drift and hammer to remove it from the spindle.
  15. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  16. If the race and rear cover separate from the hub, use a drift and hammer to remove it.
  17. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

    How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  18. Clean the spindle with a towel and brake parts cleaner.
  19. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  20. Install the new hub assembly and ensure that it fully seats onto the spindle.
  21. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  22. Thread a new retaining nut on the spindle and then run it down with an impact.
  23. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  24. The torque spec for this nut is 250 pound-feet.
  25. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  26. Install the dust cap and lightly tap it with a hammer until it's fully seated against the hub face.
  27. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  28. Reinstall any component that was removed and torque all the fasteners to factory specifications.
  29. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

    How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly

  30. Repeat the steps for the other side and reinstall the front wheels. Torque the lugs to factory spec and lower the car.
  31. How To Replace 1994-2004 Front Wheel Hub Assembly - How To Replace 1994-2004 Front Wheel Hub Assembly


All right, everybody, we hope that this article has helped you better understand how to remove and install the front wheel hub assembly for your 94-04 Mustang.


As always, make sure to keep it here with the Real Mustang Enthusiasts at LMR.com.

Sort By

94-04 Wheel Hub Parts


About the Video

Front Wheel Hub Assembly Replacement | 1994-2004 Ford Mustang

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Published on 2022-02-24
Landan covers the proper steps to service a failed 1994 - 2004 Ford Mustang Front Wheel Hub & Wheel Bearing Assembly.

Are you looking for a video on how to replace 94-04 mustang front wheel hub & wheel bearing assembly? Audible noises and steering wheel vibrations are good indicators your font wheel hub assembly needs to be replaced. These steps show you how to replace your SN95 or New Edge front wheel hub assembly and will have you back on the road in no time!



1994-2004 Mustang Front Hub Assembly with ABS ring:
https://lmr.com/item/LRS-1104A/94-04-Mustang-Front-Hub-With-Abs-Ring

Looking for all the best Mustang tech, install guides, and how-to videos for your 1994-2004 Ford Mustang? Late Model Restoration (LMR) is your channel! We have plenty of tech to get your SN95 and New Edge Mustang looking and performing great in no time. In this playlist, you will find everything from headlight installs, third brake light installs, high flow fuel system upgrades, Mach 1 chin spoiler install, and plenty more!
https://youtube.com/playlist?list=PLMti2eKQ3th9N3EXdgjS8wV0u1RzAv4eM



YouTube: https://latemodelres.to/youtube-subscribe
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto
#LMR #latemodelresto #NewEdge



Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer