Mustang Kick Panels Install (83-93)

Posted 8/24/2017 by Ethan Buchanan

Replace your worn, cracked, or missing kick panels with a set of replacement 1983-1993 Mustang kick panels from Late Model Restoration

FOLLOW: how to , install , installation , mustang , kick , panels , kick panels , 79 93 mustang , 83 93 mustang , fox body , fox body mustang

How To Install Mustang Kick Panels (83-93)

Today we're taking a look at how to replace the kick panels in your 1983-1993 Fox Body Mustang with these Ford originals that are PERFECT for restoring life into your Mustang's interior! These kick panels are made from the original ford tooling, and are a direct replacement for your cracked, faded, or even missing kick panels. This kick panel kit is offered in either a black, or a smoke grey textured finish to perfectly match your Fox Body interior color! These kick panels are made right here in the USA, and fit all 1983-1993 Fox Body Coupes, and Hatches. To install these kick panels is super simple, and should take you no longer than 30 to 45 minutes complete with nothing more than a Phillips head screwdriver, and a push pin removal tool.

Tools Needed:

  • Phillips Head Screwdriver
  • Pushpin Removal Tool

Installation Instructions

  1. Remove the four phillips head screws in your scuff plate. Now you can remove your scuff plate. Once that's done, grab your pushpin removal tool and remove the single pushpin from your kick panel.



  2. Gently lift up, then back down and out to release the kick panel from the retaining pushpins.



  3. Starting with the top, feed your new kick panel into the A-Pillar trim and back down on the the retaining pins adhered to the car. If you are missing any of this hardware, now is a great time to replace it with our hardware kit, LRS-02354AHDW!



  4. With your new kick panel in place, reinstall the single pushpin, and tighten down the four phillips head screws on your scuff plate. And with that, you are all finished!




83-93 Mustang Kick Panels


About the Video

Fox Body Mustang How To Install Kick Panels (83-93)

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Published on 2016-06-15
Replace your worn, cracked, or missing kick panels with a set of replacement 1983-1993 Mustang kick panels from Late Model Restoration.

These 1983-1993 Mustang kick panels are made from original Ford tooling, making them the perfect replacement! This tooling is the same tooling that Ford used when the panels were first manufactured, ensuring a perfect direct replacement. Fits 1983-1993 Fox Body Mustangs (Excluding Convertible)

Mustang Fitment: 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93)
Transcript
What's up everybody? Dustin here with LMR.com! Today we're taking a look at how to replace the kick panels in your 1983-1993 Fox Body Mustang with these Ford originals that are PERFECT for restoring life into your Mustang's interior!

These kick panels are made from the original ford tooling, and are a direct replacement for your cracked, faded, or even missing kick panels. This kick panel kit is offered in either a black, or a smoke grey textured finish to perfectly match your Fox Body interior color! These kick panels are made right here in the USA, and fit all 1983-1993 Fox Body Coupes, and Hatches. To install these kick panels is super simple, and should take you no longer than 30 to 45 minutes complete with nothing more than a Phillips head screwdriver, and a push pin removal tool.

You'll want to start by removing the 4 Phillips head screws in your scuff plate.

Once that's done, grab your push pin removal tool, and remove the single push pin from your kick panel.

After that, gently lift up, and back down to release the kick panel from the retaining push pins. Now you should be able to remove the kick panel from the car.

With your new kick panel, starting with the top feed it into the A-pillar trim, and push back down on to the retaining pins to secure it to the car.

If you're missing any of this hardware, this would be a great time to pick up one of our complete kick panel hardware kits.

With the kick panel in place, reinstall the single push pin, and tighten down the 4 Phillips head screws holding the scuff plate in place.

Guys, this is about as easy as it comes. With the use of a few hand tools and about 30 minutes of your time, you're one step closer to restoring the interior of your fox body. You can pick up all of these parts on our website, and for more great Mustang videos, keep it locked in right here with the real mustang enthusiasts at LMR.com