SHOP

BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04 by BMR


BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04
BMR Mustang Tubular K-Member For Coilovers - Hammertone | 94-04

Shed over 28lbs from the front end of your 1994-2004 Mustang while creating room for aftermarket power adders with this tubular k-member from BMR!

Item #BMR-KM741H
MPN# KM741H

Everyday Low Price: $369.95

In Stock
 This item is returnable. Details

Free Shipping over $99

 Add to Cart

× close

  • Ford Mustang - 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
  • Ford Mustang - 1994, 1995

Application

  • 1996-2004 Mustang 4.6L using 4.6L/5.4L/5.8L Modular based engines


Modified Application

  • 1994-2004 Ford Mustang using 4.6L/5.4L/5.8L Modular based engines

Required Parts

  • This K-Member requires the use of a front coilover kit.
  • Requires the use of caster camber plates. 
  • This k-member is designed to use coilover struts and BMR-AA041R control arms.

Fitment Notes

  • Coil spring seats and BMR Coil spring control arms are required for use with traditional coil springs.
  • Factory and aftermarket engine mounts may have alignment pins that can cause fitment issues. Removal of the alignment pin might be necessary for correct mating of engine mount to k-member.
  • Clunks, squeaks, and pops can be normal occurrences with coil-over setups
  • Coil-over conversion may reduce the area between the strut and wheel. High positive offset wheels or wide wheels may have clearance issues between wheels/tires and coil-over setup.
  • Oil filter relocation kit may be required for 03/04 Cobra.
  • This BMR K-member was designed around Mac Long-tube headers or stock exhaust manifolds. Any other brand exhaust manifolds or aftermarket header used we cannot guarantee fitment as they have not been test fit. Any other brand will require modifications to install.
  • Coyote fitment has not been tested. Fitment information on the header, steering shaft, oil pan clearance, or additional information can not be guaranteed. 
Made in the USA

 Benefits

  • Reduces Front End Weight
  • Increased Weight Transfer
  • Maintains Factory Engine Height
  • Improves Traction
  • Superior Fit And Finish

 Features

  • 1.5" DOM Tubing & 3/16" Steel Plate Construction
  • Black Hammertone Powder Coated Finish
  • SN95 Steering Geometry
  • Weighs 20lbs
  • BMR Quality

 What's in the Box

  • (1) Tubular K-Member
  • Installation Hardware Pack

1994-2004 Standard Tubular K-Member - Coilovers

Eliminate excess weight from your 1994-2004 Mustang's front end and maximize room for power adders with this tubular k-member from BMR! Manufactured in the USA utilizing heavy-duty 1.5" DOM tubing and 3/16" plate steel, this tubular k-member weighs only 20lbs! Constructed with precise bends to reduce weight where it isn't needed, BMR was able to remove 28.5lbs of excess weight versus the stock k-member. The results are improved traction and weight transfer on the street and drag strip for the ultimate racing experience! BMR developed this k-member based on the steering geometry of the SN95 Mustang chassis for improved bump steer conditions. They also went the extra mile and manufactured this tubular k-member to retain factory engine height. Finished in a durable black hammertone powder coating, this k-member will resist corrosion as good as it looks and performs!


BMR Warranty - Click Here


California Residents:
Prop 65 Warning SignWARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

About This Brand


BMR
BMR fabrication is one of the top manufactures of Mustang suspension components that both improve performance and increase traction. With a full line of control arms, panhard bars, shock tower braces, k-members, anti-roll bar kits, and drive shaft safety loops, you can have your muscle car handling better than ever. All BMR components are engineered to fit with precision, hold up to the extreme demands of racing, and give you the edge over your competition!
Add to Cart