Corbeau FX1 Pro Seat - Black Vinyl by Corbeau

Corbeau FX1 Pro
When carving corners or even daily driving, having proper support is a major key to good driving; install a Corbeau FX1 Pro racing seat for the ultimate support. Corbeau's FX1 Pro combines comfort, performance, and safety at an absolutely unbeatable price. Designed with an emphasis on comfort, this seat is one of the most comfortable race seats you will ever sit in. If you enjoy racing and want a practical and affordable shell seat, the FX1 Pro is a hard one to pass on. FX1 Pro racing seats feature composite fiberglass technology, keeping them strong yet light. As a rule of thumb, the FX1 Pro racing seat will fit up to a 36-inch waist for comfortable fitment. High-wear patches are strategically placed to protect your seat from abuse in high-wear areas. The FX1 Pro racing seat is available in vinyl fabric with leatherette high-wear patches. Ultimate lateral support with well-defined thigh, kidney, and shoulder bolsters will allow both the driver and passenger to remain in the optimal seating position. A reduction in body shifting will reduce the amount of driver fatigue and enhance the overall driving experience. 

Quality Construction
The FX1 Pro seat is made of a fiberglass composite shell with a black gel coat designed with harness slots for 3, 4, and 5-point harness capability. A submarine slot is already installed for a 5th strap. Anti-slip vinyl materials, coupled with anti-wear patches. Contains UV inhibitors. This seat has been extensively tested under extreme conditions and found to be colorfast. This seat can be bottom-mounted or side-mounted as well as the seat is equipped with a bolt on the back, giving it the ability to be bolted to a seat back brace. Aluminum side mounts are available, which allow the seat to be bolted right to the floor.

Seat Track Note

• All Corbeau seats require proper Corbeau Seat Tracks per designated year. These seats will not fit factory seat tracks. Proper Corbeau seats tracks will need to be purchased.

Important Note

• 2005+ Mustangs with side-impact air bags will require you to disable the side airbag system. Doing so is ONLY recommended for off-road or race use only.
  To disable side airbag light in 2005-2007, use the following eliminator plug from Ford- LRS-14B022AA

Disclaimer

• Late Model Restoration is not responsible for injury or any other complications caused by deactivating side-impact airbags. Late Model Restoration does not recommend or advertise this plug as a fix for a defective airbag.

Corbeau Seats Limited Warranty and Legal Disclaimers - Click Here