Benefits
- Lower Center Of Gravity
- Million-Mile Warranty
- Less Wheel Gap
Features
- 3-Way Adjustable Sway Bars
- Approx. 0.7"-0.9" Drop
- Eibach Quality
What's in the Box
- (1) Set Of Eibach Pro-Kit Springs
- (1) Front Sway Bar
- (1) Rear Sway Bar
- (4) Sway Bar Bushings w/ Brackets
2015-2020 Mustang Eibach Pro-System Plus Handling Kit GT350
Give your S550 the ultimate suspension upgrade with this 2015-2020 Mustang Shelby GT350 Eibach Pro-System suspension kit! This high-performance suspension system features a set of Eibach Pro-Kit lowering springs, and an Anti-Roll Sway Bar Kit to reduce body roll for improved handling. Get rid of the ugly wheel gap on your S550 with the help of this 2015-2020 Mustang Shelby GT350 Pro-Kit Plus suspension kit! These springs are progressive rate springs and will lower your S550 on average by approximately 0.9" in the front, and 0.7" in the rear, giving you better traction and handling.
Anti-Roll Sway bar Kit
The front sway bar features a 34mm tubular design, while the rear measures in at 25mm. Both front and rear are three-way adjustable to fine-tune your 2015-2020 Mustang Shelby GT350's suspension. Not only does this kit reduce body roll, it also helps increase handling, for better performance on and off the track. Finished in a red powder-coated finish for great styling! Includes new sway bar bushings and brackets, for a complete install.
Bushing Lubrication
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is waterproof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Ride Height Difference
- Front: Approx 0.9"
- Rear: Approx 0.7"
Spring Rates
- Front: 201 lbs
- Rear: 543-948 lbs
Front Specs
- OE rate: N/A
- PRO-KIT progressive rate: 35 N/mm (201 lbs/in)
- Bump-stop: OE
- Damper: Magnetic Ride
- Tubing: N/A
- OE wheel center to fender: 639 mm (25.2 in)
- PRO-KIT wheel center to fender: 617 mm (24.3 in)
- PRO-KIT can be aligned to OE Specs: Yes
Front Alignment
- Front Alignment:
- OE Camber = -1.03
- OE Toe = 0.00
- PRO-KIT Camber = -1.4 deg
- PRO-KIT Toe = 0.04
Front Sway Bar
- OE bar: 34mm (1.3 IN)
- Eibach bar: 35mm (1.4 IN)
- OE measure bar rate: 56 N/mm (321 lbs/in)
- Eibach measure bar rate: P1: 61 N/mm (351 lbs/in) P2: 82 N/mm (471 lbs/in) P3: 90 N/mm (515 lbs/in)
- OE bar weight: 14 lbs (6.4 kg)
- Eibach bar weight: 15.5 lbs (7.0 kg)
- Bushing: New Eibach
- End Link: OE
Rear Specs
- OE rate: N/A
- PRO-KIT rate: 95-166 N/mm (543-948 lbs/in)
- Damper: OE
- Bump-stop: Magnetic Ride
- Tubing: N/A
- OE wheel center to fender: 634 mm (25.0 in)
- PRO-KIT wheel center to fender: 617 mm (24.3 in)
- PRO-KIT can be aligned to OE specs: Yes
Rear Alignment
- Front Alignment: OE Camber = -1.03
- OE Toe = 0.00
- PRO-KIT Camber = -1.4 deg
- PRO-KIT Toe = 0.04
Rear Sway Bar
- OE bar: 22mm (0.9 IN)
- Eibach bar: 25mm (1.0 IN)
- OE measure bar rate:30 N/mm (173 lbs/in)
- Eibach measure bar rate: P1: 33 N/mm (190 lbs/in) P2: 45 N/mm (255 lbs/in) P3: 50 N/mm (285 lbs/in)
- OE bar weight: 5.5 lbs (2.5 kg)
- Eibach bar weight: 6.5 lbs (2.9 kg)
- Bushing: New Eibach
- End Link: OE
Application
- Fits 2015-2020 Mustang Shelby GT350
Eibach Warranty - Click Here