Mustang Rear Sway Bar Bushing Kit
Replace your worn out factory rubber sway bar bushings with this Energy Suspension 2011-2014 Mustang GT/GT500 Performance Pack bushing kit! The factory rubber bushings are great for reducing road noise and improving ride comfort. However, rubber allows too much give in the suspension during spirited driving. Polyurethane bushings are firm enough to control movement and maintain alignment without the harshness or resonance associated with solid metal suspension bushings. This Energy Suspension bushing kit includes black, 24mm rear sway bar bushings, as well as the sway bar end link bushings for a complete replacement kit. Polyurethane grease is included to properly lubricate the new bushings for long life.
All sway bar mount bushing applications are suggested. To verify proper fit, you must measure your sway bar before ordering! This can be accomplished by using a dial caliper or by tightening an adjustable "crescent" wrench on the sway bay and using a measuring tape/ruler to measure the distance between the jaws of the wrench.
-Fits 2011-2014 Mustang GT/GT500 w/ Performance Package
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.