2000 Mustang Cobra R Hawk Performance Front Brake Pads - HPS 5.0 by Hawk

Hawk Performance Front Brake Pads - HPS 5.0 - Cobra R
Make sure your 2000 Cobra R or M-2300-X equipped Mustang is ready for the auto cross, track days or performance street driving with Hawk HPS 5.0 brake pads. HPS 5.0 brake pads are legendary for increasing stopping power on street-legal vehicles. HPS 5.0 brake pads offer the greatest stopping power and pedal feel for your vehicle without compromising your ABS system. HPS 5.0 pads utilize a unique Ferro-Carbon, Ferro-Carbon composite and offer enhanced braking properties, designed to improve the overall driving experience while still being more than capable at the occasional track visit and still street friendly.

High Performance Street Compound
Made from a Ferro-Carbon compound that has great stopping power compared to other ceramic pads. Helping you have consistent braking thanks to their minimal brake fade at high temps. Emitting little to no brake dust and noise makes them easier to deal with than your typical race compound pad. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the standard HPS compound. Hawk Performance uses cutting edge braking technology used in racing combined with aerospace design in making these HPS 5.0 brake pads. Working on all stock, slotted, drilled and drilled and slotted rotors.

Important Installation Instructions
All brake pads require a burnishing or bedding-in procedure to achieve optimal performance and durability. Follow the steps below to bed your new brake pads properly.

Bed-in / Burnishing Instructions:

1. After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH, applying moderate pressure.
2. Make an additional 2-to-3 hard stop from approximately 40-45 MPH. Do NOT drag your brake pedal!
3. Allow at least 15 minutes for the brake system to cool down.
4. After Step 4 is completed, your new brake pads are ready for use.


Hawk Performance Warranty - Click Here