Benefits
- Improved Braking Over OE
- Very Quiet
- Gentle On Rotors
- Extended Pad Life
Features
- Great For Use With ABS
- Ferro-Carbon Compound
- Minimal Fade At High Temps
What's in the Box
- (1) Set HPS 5.0 Front Brake Pads
Hawk Performance
Hawk Performance has just released the new HPS 5.0 brake pad that is the perfect upgrade over your factory pad! These Mustang front brake pads will be a direct fit for the 1994-2004 Mustang Cobra, 2001 Bullitt, and 2003-04 Mach 1. The new compound is great for ABS-equipped Mustangs as it has just the right amount of torque. Too much brake torque and your ABS goes into ICE mode, too little and there is no improvement to the product. Pedal feedback, Noise, Brake Torque, and Dust control was their goal with High-Performance Street 5.0. Not a replacement for the current HPS product, but a change that allows the driver to challenge themselves and their car with a new and unique driving feel.
HPS 5.0 Compound
Hawk HPS 5.0 brake pads are perfect for high-performance street cars that's purpose is daily or weekend driving. While they will perform on the occasional track visit, their main purpose is a slightly more aggressive pad over stock applications.
Application
- 1994-2004 Mustang Cobra
- 2001 Mustang Bullitt
- 2003-04 Mustang Mach 1
Important Installation Instructions
All brake pads require a burnishing or bedding-in procedure to achieve optimal performance and durability. Follow the steps below to bed your new brake pads properly.
Bed-in / Burnishing Instructions:
- After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH, applying moderate pressure.
- Make an additional 2-to-3 hard stop from approximately 40-45 MPH.
Do NOT drag your brake pedal!
- Allow at least 15 minutes for the brake system to cool down.
- After Step 4 is completed, your new brake pads are ready for use.
Hawk Performance Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
