2011-14 Mustang JLT Series II Cold Air Intake Kit 5.0 by JLT Performance

Mustang JLT Series II Cold Air Intake Kit
Increase horsepower, and torque, in your 2011-2014 Mustang 5.0 with JLT's new and improved Series II cold air intake! When JLT originally released their Coyote intake back in 2010, there was no Boss 302, Holley Sniper, or large aftermarket throttle bodies to design around. Now, 7 years later, the Coyote aftermarket is flooded with options for this engine. JLT decided it was time for a change, and built their new Series II intake from the ground up! With their new design, this intake now fits properly with Boss 302, and Holley Sniper, intake manifolds; as well as 85mm and 90mm throttle bodies on the stock intake manifold!

New & Improved Features
JLT's Series II intake starts with a larger, 4" throttle body opening to match well with 90mm throttle bodies. A 4", straight coupler is included for the 90mm, as well as a 4-3.5" reducer for the stock unit. The 4" opening then flows into the 112mm molded MAF housing, which is up from the previous 107mm MAF. This size increase improves airflow without causing drivability issues, and is the maximum size allowed in NMRA Coyote stock racing! An all new, one off designed, S&B air filter is included that has a massive 5" diameter at the inlet, with a full radius bellmouth, into 1" deep pleats. This combination provides the best air flow possible!

High Quality Construction
JLT is widely known for their superior quality products, and it certainly shows in their new Series II cold air intake. From the fit and finish, to the performance improvement, the Series II intake will have you grinning from ear to ear after installation. JLT utilizes a lightweight, plastic intake tube with a black textured finish that looks right at home in your engine bay. The 112mm, molded MAF has been rotated to the engine side of the tube, for a more attractive look. JLT's roto molded heat shield includes weatherstrip to ensure nothing but cold air reaches the air filter. Heavy duty clamps, silicone couplers, and all the installation hardware you need is included for a quick, and easy, installation.

Installation Note
A custom tune is required for this cold air intake.

Fitment Note
-Fits Stock Intake Manifold
-Fits Stock Intake Manifold w/ 85mm & 90mm Throttle Bodies
-Fits Boss 302 Intake Manifold
-Fits Holley Sniper Intake Manifold

Application
-Fits 2011-2014 Mustang GT
-Fits 2012-2013 Mustang Boss 302

JLT Performance Warranty - Click Here