Benefits
- Increased Traction
- Reduced Body Sway
- Reduced Wheel Hop
Features
- Black Powder Coated Finish
- Spherical Axle-Side Bushings
- 3-Piece Poly-Ball Bushings
- Adjustable Spring Perch
What's in the Box
- (2) Lower Adjustable Control Arms
- 3-Piece Poly-Ball Bushing Kit
J&M Adjustable Rear Lower Control Arms
Upgrade your rear suspension with these adjustable Mustang rear lower control arms from J&M! Beefing up the rear suspension of your 1979-1998 Fox Body or SN95 is a great way to improve grip, reduce hop, reduce body sway, and overall get through the track faster! You can have all of the power in the world, but if you can't keep your rubber to the road, you aren't going anywhere. With a powder coated finish, adjustable spring perch, tubular steel construction, and a unique bind-free 3-Piece Poly-Ball bushing setup, these J&M adjustable Mustang rear lower control arms are exactly what you need to get your car down the straightaway or cut through those tight corners faster than anyone else on the track!
Adjustable Ride Height
These control arms are adjustable, meaning that you have the power to fine-tune the rear suspension to fit your application perfectly. Lower your vehicle 1" or raise it by 2" by using J&M's NASCAR style weight jack system!
3-Piece Poly-Ball Bushings
The Poly-Ball bushing combination incorporates a very hard inner polyurethane ball which is surrounded by soft socket outer cups. This combination allows the bushing to articulate like a spherical bearing during cornering. The hard inner ball does not allow the bushing to deflect during acceleration giving you great traction during acceleration.
Spherical Bushings
These control arms are equipped with spherical bushings on the axle side of the control arm. Due to additional NVH and binding caused by the spherical axle bearings, we recommend this kit to be used on predominately track & light street applications.
ApplicationFits 1979-1998 Ford Mustang Bushing Lubrication
- The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
- If these control arms will be installed on an early model Fox Body Mustang with the small rear sway bar, you must transfer over the factory sway bar bracket and attach it to the bracket on the new lower controls or upgrade to a larger sway bar.
- Due to the use of spherical bushings within this product, you will experience an increase in noise, vibration, and harshness.
J&M Products Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
