Freshen up the exterior of your 2003-2004 Terminator Cobra with this sequential 3rd brake light! Due to the intricate design of the original 3rd brake light, these were notorious for cracking at the corners near the mounting hardware and fading from excessive sun exposure. From the factory, the original 3rd brake light illuminated all of the bulbs at once when the brake pedal was pressed. For an additional custom touch to your New Edge Mustang, this 3rd brake utilizes a sequential function that illuminates the bulbs starting from the center, outward! Equipped with bright LED bulbs and a smoked lens, this 3rd brake is the perfect choice for your Cobra spoiler. Installation is plug and play as this unit has the correct electrical connector as the factory 3rd brake light. To ensure moisture is kept out for a long service life, a foam gasket and rubber grommets are pre-installed.
Mounting hardware is NOT included but can be purchased HERE.
If installing into a 1999-2004 Mustang with an OE or aftermarket cobra rear spoiler, some wire splicing will be required as the electrical connectors are not the same as the 2003-2004 Cobra.
The black wire from the brake light is spliced into the black wire from the vehicle harness.
The green wire from the brake light is spliced into the green wire from the vehicle harness.
Fits 2003-2004 Mustang Cobra with Factory Equipped Spoiler
Fits 1999-2004 Mustang with 2003-2004 OE or Aftermarket Cobra Rear Spoiler