1984-1993 Mustang Quad Shock & Bracket Kit by 5.0 Resto

Quad Shock and Bracket Kit
Restore your 1984-1993 Fox Body Mustang's rear suspension performance with this 5.0 Resto bracket and Gabriel quad shock kit. The rear quad shocks are installed to reduce the axle wind-up that causes wheel hop. They did this by damping out the axle's tendency to rotate during acceleration. Often, these are removed and thrown in the trash when installing aftermarket lower control arms or for added wheel clearance. Reinstall your missing quad shocks with this 5.0 Resto bracket, and Gabriel quad shock kit for the perfect solution for your Fox Body Mustang project!

Gabriel Rear Quad Shock
Gabriel's G-Force technology is the result of years of product development to provide the ideal balance of safety and performance. Their StableSteer valving, along with high-pressure nitrogen gas, improves tire contact for quicker response and reduces fade with better control on the road. The use of D.O.M. tubing reduces internal wear for longer product life, and the leak-proof piston seal self-compensates for wear, further extending life. With many other superior technologies like single-lip piston seals, chromed piston rods, sintered Iron pistons, and on-demand variable valving are built into the strut. Gabriel Ultra rear quad shock is the perfect choice for daily commutes or cross-country trips in your Mustang!

5.0 Resto Quad Shock Bracket
5.0 Resto uses heavy gauge stamped steel brackets with the correct mounting holes pre-drilled to mount to the Fox Body rear frame. The quad shock mounting stud with an integrated washer has the proper diameter, length, and thread pitch for your Fox Body. Each bracket is finished in a tough black E-coat that will last for many years of rust-free service on your rear suspension. These brackets bolt to the rear frame rails and supply a mounting point for the rear quad shock that is attached to the rear axle.

5.0 Resto Quad Shock Hardware
5.0 Resto assembled this hardware kit to eliminate the guesswork that often comes with hardware that is not easily accessible. Always designed with the enthusiast in mind, 5.0 Resto developed this high-quality quad shock hardware kit that comes complete with 10.9 grade nuts and bolts in a black phosphate coating along with zinc-plated washers. Included are four bracket-to-frame bolts, two quad-shock-to-bracket bolts with washers, and two quad-shock-to-rear-end bolts for a no hassle quad shock hardware solution.

5.0 Resto Products Limited Warranty - Click Here