1984-1993 Mustang Quad Shock Bracket & Hardware Kit by 5.0 Resto

Quad Shock Bracket & Hardware Kit
Restore your 1984-1993 Fox Body Mustang's rear suspension performance with this 5.0 Resto rear quad shock bracket and hardware kit. The rear quad shocks are installed to reduce the axle wind-up that causes wheel hop. They did this by damping out the axle's tendency to rotate during acceleration. Often, these are removed when installing aftermarket lower control arms or for added wheel clearance. These brackets bolt to the rear frame rails and supply a mounting point for the rear quad shock that is attached to the rear axle. Whether you are replacing rusted-out brackets or reinstalling missing quad shocks during your restoration, 5.0 Resto's quad shock and hardware kit is the perfect solution for your next Fox Body Mustang suspension restoration project.

Quad Shock Bracket
5.0 Resto uses heavy gauge stamped steel brackets with the correct mounting holes pre-drilled to mount to the Fox Body rear frame. The quad shock mounting stud with an integrated washer has the proper diameter, length, and thread pitch for your Fox Body. Each bracket is finished in a tough black E-coat that will last for many years of rust-free service on your rear suspension. They will bolt into the factory location with the supplied hardware without additional modifications. 

Quad Shock Hardware
5.0 Resto assembled this hardware kit to eliminate the guesswork that often comes with hardware that is not easily accessible. Always designed with the enthusiast in mind, 5.0 Resto developed this high-quality quad shock hardware kit that comes complete with 10.9 grade nuts and bolts in a black phosphate coating along with zinc-plated washers. Included are four bracket-to-frame bolts, two quad-shock-to-bracket bolts with washers, and two quad-shock-to-rear-end bolts for a no hassle quad shock hardware solution.

5.0 Resto Products Limited Warranty - Click Here