Benefits
- Replaces Worn/Damaged Pulleys
- Restores Engine
- Direct Replacement
Features
- Black E-Coat Finish
- Steel Construction
- Factory Dimensions
What's in the Box
- (1) Crank Pulley
- (1) Water Pump Pulley
- (1) Alternator Pulley
Mustang 5.0 Resto Factory Style Pulley Kit
Restore the performance of your 5.0 engine with this factory style 1979-1993 Mustang pulley kit! This 5.0 Resto stock replacement engine pulley kit is a must have when restoring your Fox Body engine. Stock pulleys usually have paint chipped off, or they have simply rusted due to sitting. With this budget friendly kit, you will have the engine bay looking factory original in little to no time at all.
Factory Size & Performance
Tired of having all of those charging problems? Ditch those underdrive pulleys and never worry about it again. Kiss those charging and cooling problems goodbye with the brand new 5.0 Resto factory style replacement engine accessory drive pulleys. Stop wasting your time searching the internet for a "decent" used set, pick up this kit and get your Fox Body Mustang back on the road!
Product Note
Due to the different shaft lengths with aftermarket alternators, primarily 3G-style alternators, the lock washer may need to be removed/omitted. If this is required for your application, apply blue thread locking compound to the threads and tightening the retaining nut. Verify that there is adequate clearance between the rear of the pulley and the alternator housing, and the retaining nut properly bottoms out against the pulley.
Pulley Specs- Alternator Pulley - 2.1"
- Water Pump Pulley - 4.6"
- Crank Pulley - 5.8"
Application
Fits 1979-1993 Mustang V8
5.0 Resto Products Limited Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
