Makes Your Mustang's Interior Look & Feel Like New Again
Practically Identical to Original
Made In The USA!
OE Style Upholstery Stitching Pattern
Better attachment design than OE!
New Front Seat Foam Required for DIY Installation
What's in the Box
(2) Headrest Covers
(1) Driver Seat Back Upholstery
(1) Driver Seat Bottom Upholstery
(1) Passenger Seat Back Upholstery
(1) Passenger Seat Bottom Upholstery
(2) Rear Seat Back Upholstery
(1) Rear Seat Bottom Upholstery
1994-96 Mustang Sport Seat Upholstery
This reproduction Mustang Seat Upholstery is intended for GT & Cobra trim level 1994-96 Mustang convertible with sport seats. The upholstery features vinyl back & sides with a vinyl seating surface. The color is Saddle Tan.
High Quality Vinyl Sport Seat Upholstery for Your Mustang
If the seats in your Mustang have seen better days, a set of new seat upholstery for your SN95 Mustang is just the ticket! Just follow the instructions on our Mustang seat upholstery installation blog by removing the factory seat upholstery and re-cover your Mustang seats with this reproduction kit to make the seats in your Mustang look and feel like new again.
Made From OE Patterns
This Mustang vinyl upholstery kit features OE style patterns to match the seats that your Mustang came with from the factory. The material used is not factory exact, but is the closest match currently available.
Front Seat Foam Required for DIY Installation
Unlike the original upholstery which glues on to the foam, this upholstery kit installs easily with the addition of LRS-64810L front seat foam, sold separately. The rear seat upholstery attachment kit is included in the upholstery set. You no longer have to make a trip to the upholstery shop if you don't want to! However, if you do not wish to purchase new seat foam, you can still deliver your car & the new upholstery to the upholstery shop & for about $300-$350*, they'll put it on for you using your original foam.
- Does both front and back seats!
*Prices will vary from shop to shop & pricing is displayed for comparison purposes only.
Check out this TMI installation video!
TMI is the only interior manufacturer that offers a Limited Lifetime Warranty. This will cover any workmanship errors caused by the manufacturer and does not cover installation errors or normal wear and tear.
This seat upholstery is patterned after the original style upholstery in your vehicle. The material itself does not match the OEM material, but it is the closest available match. Upholstery age, sun fading, and other variables may cause color differences.
I expected a lot from TMI. What I got were seat covers that had wood splinters on the underside of them, tore on installation, where missing some hardware, and took a lot of creativity to install. In the end, they look good. I don't like the feel of them. They tend to be almost sticky, which makes it hard to slide in and out of the car. I installed them in 2016. I worry about the longevity of them because the headrest cover tore on the seam when I was installing it. I ended up using the originals, because TMI blamed me. Then for $25 they sent me the wrong color. I also see some tiny dark spots on the upholstery that seem to be developing by the abrasion of a person sitting in them. I tend to pamper the car more than drive it. So there have not been a lot of passengers. I think TMI would send me some new ones under warranty. However, the pain of the installation is so bad that I don't think I would use their product again. The wood splinters I noted seem to be from the material sliding across a plywood table. They were 6" in length, and I had to carefully remove them because they made the surface dimple. If you buy these, get some strong nylon cord to use as your thread. Take a coat hanger and make a large sewing needle. A heavy pair of gloves and a sharp razor knife will help too. If you plan on keeping your car, then get new foam for the front seats (or at least the driver's side). The back will probably be fine. TMI does have a helpful video you can use to walk you through the installation. LMR was helpful in getting me the missing hardware.
TMI PRODUCTS, INC., a family-owned company, was founded in 1982 when the Tuccinardi brothers began making Volkswagen door panels in their family garage in Torrance, California. Today, TMI makes high-value interior automotive components like seating, interior consoles, floor coverings, door panels, convertible roof assemblies, headliners and integrated electronic systems for your Mustang or Lightning. TMI has mastered fast-to-market niche programs. From prototype to production, TMI's streamlined processes integrate emerging technologies for volume or short run projects. TMI's quick response to emerging market opportunities provides the industry with innovative high demand products. And TMI's attentive product refreshment plans for mid-cycle changes enable TMI's partners to offer hot, profitable products.
Shop TMI products to get your leather, vinyl, suede, and cloth Mustang upholstery at LatemodelRestoration.com!