Benefits
- Ford Original Part
- Replaces Faulty Injector
- Restores Fuel System
Features
- Correct Spray Pattern
- Durable Construction
- O-Rings Included
Ford Direct Fuel Injector - 5.0Restore the factory fuel flow in your 2018-2023 Mustang 5.0 with this Ford Original direct injector! The Gen 3 Coyote engines have two sets of injectors: one set of standard injectors on the intake manifold and a set of High-pressure direct injectors that spray fuel directly into the combustion chamber under very high pressure. This allows for lower emissions and a more precise control of the volume, timing, and quantity of fuel. This stock replacement direct injector is brand new and not remanufactured, but it is designed to restore factory fuel flow thanks to the factory spec flow rate. Manufactured with the correct connector, this injector will be a direct replacement without any adapters needed. The injector features high-temp o-rings, which enable prolonged sealing under extreme heat conditions while preventing fuel from leaking or harmful debris from contaminating the injector. Ensure your factory performance is restored with this Ford Original direct injector!
Installation Notes
- Before installation, you MUST depressurize your Coyote fuel system.
- To depressurize the fuel system, locate and disconnect the fuel pump driver module on the LH side, beneath the rear seat cushion.
- Start the engine and allow it to idle until the engine stalls. Turn off the ignition switch.
- After service is complete, reconnect the FPDM connector and reinstall the seat cushion.
- Cycle the ignition and wait for 3 seconds. Check for leaks before starting the engine.
Ford Motorcraft Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
