SVT Lightning Center Cap
Restore the exterior of your 1993-1995 SVT Lightning with this high quality replacement center cap! The factory center caps are commonly missing from the first generation Lightning wheels. The caps often fall out while driving and sometimes come up stolen. We're proud to offer this high quality reproduction center cap to restore the wheels on your Lightning. The cap features a silver finish with the black center piece just like the original cap. A new snap ring is pre-installed on the back of the cap to ensure the cap stays put on your wheels. This cap will only fit the factory 17" 93-95 SVT Lightning wheels.
Because of manufacturing tolerances, spring tension may need to be adjusted for proper fitment. Please reference our product video for adjustment procedure.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2016-08-24 Quality Construction. Each center cap is manufactured from OE-grade, high quality plastic and then painted silver to match the factory center cap. The correct gloss black center medallion and spring clip are also included with each center cap.
Restored Exterior. These center caps are the perfect replacement for damaged, broken and missing factory caps. No more chasing down over-priced OEM take-offs.
Fitment: 1993-1995 F-150 SVT Lightning
Item # LTP-1130 Kit Item # LTP-1130K
***Installation Note*** Because of manufacturing tolerances, spring tension may need to be adjusted for proper fitment. Please reference our product video for adjustment procedure.
The first two that arrived had several scratches on them. However, LMR promptly replaced them.
Overall, the reproductions are very close to the originals. The biggest difference is the color. The originals are a little darker and have metal flake in them.
The metal ring on the LMR cap is slightly bigger than the original. Because of this, I can almost guarantee you will have to crimp it together to make it smaller. I had to do this on all of mine. I found that if you crimp it to the point where it rests on all of the tabs except one, the cap will snap in and fit snugly.
The LMR reproductions are definitely a good alternative to hunting down originals. Due to the color difference, I would suggest replacing them in pairs (on the same side). Otherwise, you will notice the difference front to back. If you have polished wheels, these blend in better than the darker originals.
My review with pictures can be found on nloc dot net
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Looks like OEM.
Don C. on
Just fiitted replacement center cap in my 93 Lightning after some fiddling with the spring tension per instructions. Make sure to align a small plastic tab at outer edge of cap with a corresponding hole in the rim otherwise it will either hang up or break off. This was not mentioned in the instructions. I will see if it works as well as the three original caps still on the truck and update this review. I am fine with the appearance and satisfied with the value.