Ford Performance Hydraulic Lifters
- Direct Replacement for OEM 5.0L Roller Lifters
- Fits Factory or Aftermarket Roller Engines
- OEM Ford Replacement Parts
- 50 State Legal
These Ford Performance stock style replacement lifters are a direct replacement for the factory lifters in 1985-1995 Ford Mustang 5.0L. These M-6500-R302 rollers are a hydraulic tappet design with a roller tip so they make almost no noise and free up some power in the process. These are compatible with stock or aftermarket roller cams only and use stock or aftermarket 5/16 pushrods. They are not for use with flat tappet cams. If you are building a roller block from scratch, or any of the FRPP 5.0L based short blocks, use these lifters with the roller cam of your choice and an FRPP lifter retainer kit M-6253-A50. For higher revving engines, take a look at the M-6500-R302H as they allow for an additional 200-300RPM to the top of the rev range. These hydraulic lifters can only be used with roller cam compatible blocks. They cannot be used if retrofitting a non-roller block to a roller cam.
-Removal of heads may be necessary for installation.
- Fits 1985-1995 Ford Mustangs
Ford Performance Racing Parts "Packs" and Component Parts Limited Warranty - Click Here
Ford Performance Racing Parts - NO WARRANTY - Click Here
Ford Performance Racing Parts Crate Engine Limited Warranty - Click Here