Benefits
- Keep Yourself Protected!
- NHRA & NMRA Approved
- Bolt In Installation
Features
- 6-point
- E-Z-Remove Door Bars
- Fixed Harness Bar
What's in the Box
- (1) 2005-2014 Mustang Coupe 6-Point Roll Bar
- Needed Hardware
- Instructions
Maximum Motorsports Drag Race 6 Point Roll Bar
This Maximum Motorsports 6-point roll bar is intended for drag racing and conforms to the NHRA and NMRA rules. Designed to fit the stock 2005-2014 Mustang interior, this roll bar has door bars for additional side impact protection. The door bars are removable, they bolt to the floor, and are secured to the main hoop with one bolt. It easily installs in hardtop Mustangs without welding inside the car. The fixed harness mount tube is pre-welded in place, as the NHRA rules prohibit removable harness mount tubes.
High-Quality Construction
MM roll bars are uncoated, bare steel. For a high-quality finish, the installer should paint or powder coat the roll bar after the welding is completed. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing).
Application
- 2005-2014 Mustang Hardtop
Maximum Motorsports Warranty
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
