Features
- Machined Aluminum Construction
- 1/2" Thick Plate
What's in the Box
- (2) Front Spacers
- (4) Front Spacer Bolts
- (2) Rear Spacers
- (4) Rear Spacer Bolts
Maximum Motorsports 1/2" K-Member Spacers
Installing spacers between the k-member and the chassis creates more clearance between the top of the engine and the underside of the hood. The increased clearance to the hood aids with some engine swaps, such as when putting a 5.4L Triton truck engine into an SN95 Mustang. This 1/2" spacer kit includes four aluminum spacer plates to fit between the k-member and the chassis. Longer k-member attachment bolts are included. Reuses OEM nuts and nut-plates.
Product Notes- When installed on a Mustang that also has a front coil-over kit these spacers have no effect on ride height. The spacers move the k-member downwards from the chassis, towards the ground.
- When installed with a stock k-member, and with the springs still in the stock location, the ride height will change. The chassis will move upwards by the thickness of the spacers, and the k-member will remain the same distance from the ground.
Note
A front-end alignment will be necessary.
Maximum Motorsports Warranty
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
