Benefits
- Improves Turn-In Response
- Eliminates Steering Rack Movement
- Replaces Worn Bushings
Features
- CNC Machined
- 6061 Aluminum Construction
- Anodized Finish
What's in the Box
- (2) Inner Bushings
- (2) Outer Bushings
- (6) Washer
- Installation Instructions
Maximum Motorsports Mustang Aluminum Rack Bushings Improve your Mustang's turn-in response by installing a set of Maximum Motorsports' aluminum steering rack bushings! They increase the effect of the Ackerman steering geometry by moving the steering rack rearward in the chassis and eliminate the steering rack movement allowed by rubber and urethane bushings. These precision-made bushings are CNC machined from heat-treated 6061 aluminum. Maximum Motorsports' research on bumpsteer proved that with a stock K-member, a center drilled bushing is best, whatever the ride height. When large changes in geometry have been made, as with the MM K-member, the correct use of offset steering rack bushings will relocate the rack to a position which makes it easier to correct the bumpsteer with the MM Adjustable Tie-Rod Ends. Offset steering rack bushings move the rack far too much on stock K-Members, and make an acceptable situation far worse than if you had done nothing at all.
Maximum Motorsports Warranty
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
