1994-1998 Mustang Powerstop OE Rotor & Pad Kit - Front & Rear - GT/V6 by PowerStop

Prevent squeaking brakes on your SN95 with this OE replacement PowerStop front and rear brake kit for the 1994-1998 V6 and GT Mustangs!

Item #PS-1300
MPN# KOE1300

Everyday Low Price: $239.99

In Stock Ships tomorrow!

This item is not eligible for discounts or coupon codes.

This item is returnable. Details

Free Shipping over $99

Add to Cart

Add to Wishlist

Ford Mustang - 1994, 1995, 1996, 1997, 1998
Sub Models: GT, V6

Brake pad break-in procedure:

Perform 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. If you’re forced to stop, either shift into neutral or give room in front so you can allow the vehicle to roll slightly while waiting for the light. The rotors will be very hot and holding down the brake pedal will allow the pad to create an imprint on the rotor. This is where the judder can originate from.
Then do 5 moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot.
After this is complete, drive around for as long as possible without excessively heating the brakes and without coming to a complete stop (Try for about 5 minutes at moderate speed).
This is the cooling stage. It allows the heated resin in the brake pads to cool and cure.
After the brakes have cooled to standard operating temperature, you may use the brakes normally.

Benefits

Low-Dust Formula
Mill Balanced Rotors
Virtually Silent Braking
Perfect For Daily Driving

Features

Ceramic Brake Pads
Hi-Temp Brake Lubricant
Stainless-Steel Hardware
Dual-Layer Rubberized Shims

What's in the Box

(2) 11" Front Brake Rotors
(2) 10.5" Rear Brake Rotors
(1) Set Front Ceramic Pads
(1) Set Rear Ceramic Pads
(1) Hardware Kit
(2) Tubes Hi-Temp Brake Lubricant

1994-1998 Mustang OE Rotor & Pad Kit - Front & Rear
Keep the front brake dust to a minimum on your daily driven 1994-1998 SN95 Mustang V6 or GT with this PowerStop OE front and rear brake kit! PowerStop offers this kit as a complete solution to replacing your worn-out and squeaking Mustang brakes. Utilizing Evolution Plus ceramic pads and Autospecialty brake rotors gives you a combination of great braking performance at a budget-conscious price! Z17 brake pads feature a low-dust ceramic formula with dual-layer rubberized shims for virtually silent braking and little brake dust. Autospecialty 11" front and 10.5" rear rotors come mill balanced for reduced vibrations and machined for an easy bolt-on solution! PowerStop supplies hi-temp brake lubricant as well as stainless steel hardware where needed to get the job done right!

Z17 Evolution Plus Ceramic Pads

The ceramic compound used in the PowerStop Z17 Evolution Plus ceramic brake pads is intended to increase stopping power while minimizing brake dust and noise. Z17 pads retain constant wear and performance while ensuring a quick break-in thanks to OE-positive mold technology and a thermally scorched pad surface. Chamfered edges help optimize cooling and suppress noise, while additional noise dampening is performed by the dual-layer rubberized shims. Stainless-steel hardware and hi-temp brake lubricant is included with the brake pads making it easier to complete your brake job.

Autospecialty Rotors

PowerStop Autospecialty rotors are a budget-conscious stock replacement for your daily driver that is a bolt-on replacement with no modifications necessary. Non-coated rotors are 100% mill-balanced and precision-made with the correct weight and vane count as the originals. Machined cross-hatched finish on the friction surface allows for optimal pad break-in and smooth, quiet performance. The PowerStop Autospecialty rotor is your best option if you want to easily replace the rotor and get your car back to its factory performance.

PowerStop Warranty - Click Here

Drilled & Slotted Rotors Vs Regular Rotors

Published 1/13/23

California Residents:

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

About This Brand

PowerStop set out to design a kit that removed the guesswork from shopping online for brakes by including everything in one box—pads, rotors, hardware and more. LMR offers PowerStop upgrade kits available for 1987-current Mustangs and Lightnings! Every brake pad uses a carbon-fiber ceramic material, providing a dust-free, noise-free, fail-free braking experience. Engineers work to ensure everything made is a direct bolt-on replacement for the original brakes, making it easy to upgrade your Mustang or Lightning braking performance! PowerStop has been providing a safe, problem-free performance brake upgrade since ’95 and is equally committed to eco friendly practices.