SHOP

1994-2004 Mustang PowerStop OE Rotor & Pad Kit - Rear - 11.65" - Cobra/Bullitt/Mach 1 by PowerStop


1994-2004 Mustang PowerStop OE Rotor & Pad Kit - Rear - 11.65" - Cobra/Bullitt/Mach 1

Restore the braking performance of your 1994-2004 Mustang with this OE replacement PowerStop rear brake kit for the Cobra, Bullitt, or Mach 1!

Item #PS-1306
MPN# KOE1306

Everyday Low Price: $109.99

In Stock Ships today!
This item is not eligible for discounts or coupon codes.
 This item is returnable. Details

Free Shipping over $99

 Add to Cart


  • Ford Mustang - 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
  • Sub Models: Cobra, Bullitt, Mach 1
Brake pad break-in procedure:
  • Perform 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. If you’re forced to stop, either shift into neutral or give room in front so you can allow the vehicle to roll slightly while waiting for the light. The rotors will be very hot and holding down the brake pedal will allow the pad to create an imprint on the rotor. This is where the judder can originate from.
  • Then do 5 mod­erate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot.
  • After this is complete, drive around for as long as possible without excessively heating the brakes and without coming to a complete stop (Try for about 5 minutes at moderate speed). 
  • This is the cooling stage. It allows the heated resin in the brake pads to cool and cure.
  • After the brakes have cooled to standard operating temperature, you may use the brakes normally.

 Benefits

  • Low-Dust Formula
  • Mill Balanced Rotors
  • Virtually Silent Braking
  • Perfect For Daily Driving

 Features

  • Ceramic Brake Pads
  • Hi-Temp Brake Lubricant
  • Stainless-Steel Hardware
  • Dual-Layer Rubberized Shims

 What's in the Box

  • (2) 11.65" Rear Brake Rotors
  • (1) Set Rear Ceramic Pads
  • (1) Hardware Kit
  • (1) Tube Hi-Temp Brake Lubricant

OE Rotor & Pad Kit - Rear -  Cobra, Bullitt, or Mach 1
Replace the rear brakes on your daily driven 1994-2004 Mustang Cobra, Bullitt, or Mach 1 with this PowerStop OE rear brake kit! PowerStop offers this kit as a complete solution to replacing your worn-out and squeaking Mustang rear brakes. Utilizing Evolution Plus ceramic pads and Autospecialty brake rotors gives you a combination of great braking performance at a budget-conscious price! Z17 brake pads feature a low-dust ceramic formula with dual-layer rubberized shims for virtually silent braking and little brake dust. Autospecialty 11.65" rear rotors come mill balanced for reduced vibrations and machined for an easy bolt-on solution! PowerStop supplies hi-temp brake lubricant as well as stainless steel hardware where needed to get the job done right!

Z17 Evolution Plus Ceramic Pads
The ceramic compound used in the PowerStop Z17 Evolution Plus ceramic brake pads is intended to increase stopping power while minimizing brake dust and noise. Z17 pads retain constant wear and performance while ensuring a quick break-in thanks to OE-positive mold technology and a thermally scorched pad surface. Chamfered edges help optimize cooling and suppress noise, while additional noise dampening is performed by the dual-layer rubberized shims. Stainless-steel hardware and hi-temp brake lubricant are included with the brake pads making it easier to complete your brake job.

Autospecialty Rotors
PowerStop Autospecialty rotors are a budget-conscious stock replacement for your daily driver that is a bolt-on replacement with no modifications necessary. Non-coated rotors are 100% mill-balanced and precision-made with the correct weight and thickness as the originals. Machined cross-hatched finish on the friction surface allows for optimal pad break-in and smooth, quiet performance. The PowerStop Autospecialty rotor is your best option if you want to easily replace the rotor and get your car back to its factory performance.


PowerStop Warranty - Click Here


California Residents:
Prop 65 Warning SignWARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

About This Brand


PowerStop
PowerStop set out to design a kit that removed the guesswork from shopping online for brakes by including everything in one box—pads, rotors, hardware and more. LMR offers PowerStop upgrade kits available for 1987-current Mustangs and Lightnings! Every brake pad uses a carbon-fiber ceramic material, providing a dust-free, noise-free, fail-free braking experience. Engineers work to ensure everything made is a direct bolt-on replacement for the original brakes, making it easy to upgrade your Mustang or Lightning braking performance! PowerStop has been providing a safe, problem-free performance brake upgrade since ’95 and is equally committed to eco friendly practices.
Add to Cart