Mustang Cobra Prothane 25MM Rear Sway Bar Bushings | 99-04 by Prothane

Prothane 25mm Rear Sway Bar Bushings
Reduce bushing deflection and improve the handling of your 1999-2004 Mustang Cobra with these Prothane rear sway bar bushings. Featuring a strong black polyurethane construction, these bushings are designed with performance and long service life in mind! They are made in the factory 25mm size and resist changes in temperature and oils from normal atmospheric conditions and under-car grit and grime.

Prothane Quality
Prothane's polyurethane bushings are firm enough to control movement and maintain alignment in sway bars, control arms, and other stressed suspension components without the harshness or resonance associated with solid metal suspension bushings. After the installation of these bushings, it will be easy to experience the precise steering, road feedback and the added firmness Prothane bushings offer!

NOTE
All sway bar mount bushing applications are suggested. To verify proper fitment, you must measure your sway bar before ordering! This can be accomplished by using a dial caliper or by tightening an adjustable "crescent" wrench on the sway bay and using a measuring tape/ruler to measure the distance between the jaws of the wrench.

Bushing Lubrication
The suspension bushings included can only be lubricated with the included PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is waterproof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. The use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided

Prothane Warranty - Click Here