Prothane Rear Sway Bar Bushings - 20mm
- Improves Handling
- Reduces Flex
- Less Deflection
- Longer Life
- Designed 20MM Diameter Sway Bar
What's in the Box
- (2) Rear Sway Bar Bushings
- (4) Rear Sway Bar End Link Bushings
Increase handling and get less deflection with a set of urethane sway bar mount bushings for your 2005-2010 Mustang. Urethane sway bar mount bushings deflect less for better handling. Urethane resists oil and temperature changes for longer life. Sold in pairs.
Polyurethane is an ideal material for performance suspension bushings, motor, and transmission mounts. Don't get us wrong, Mustang rubber suspension bushings and mounts are a proven compromise. However, additional horsepower, plus-size tires, lowered canyon carving street setups all mix with normal atmospheric conditions and under-car grit and grime to stress rubber bushings beyond design limits.
Polyurethane bushings are firm enough to control movement and maintain alignment in sway bars, control arms, and other stressed suspension components without the harshness or resonance associated with solid metal suspension bushings.
All sway bar mount bushing applications are suggested. To Verify proper fit, you must measure your sway bar before ordering! This can be accomplished by using a dial caliper or by tightening an adjustable "crescent" wrench on the sway bay and using a measuring tape/ruler to measure the distance between the jaws of the wrench.
Fits 2005-2010 Ford Mustangs
- The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Prothane Warranty - Click Here