1994-2004 Mustang QA1 Tubular K-Member - Modular by QA1

1994-2004 Mustang QA1 Tubular K-Member - Modular

Reduce front end weight while improving suspension geometry with this QA1 1994-2004 Mustang 4.6 tubular K-member!

Item #QA1-MUK12

Everyday Low Price: $554.95

Low Stock Only 3 available. Ships tomorrow!
 This item is returnable. Details

Free Shipping over $99

 Add to Cart

  • Ford Mustang - 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
  • Ford Mustang - 1994, 1995


  • 1996-2004 Ford Mustangs with 4.6L 2V/3V/4V, 5.4L 2V/3V/4V, and 5.8L 4V Modular based engines
  • 1996-2004 Ford Mustangs with 5.0L/5.2L Coyote based engine

Modified Application

  • 1994-1995 Ford Mustang with 4.6L 2V/3V/4V, 5.4L 2V/3V/4V, and 5.8L 4V Modular based engines
  • 1994-1995 Ford Mustang with 5.0L/5.2L Coyote based engines

Required Parts

  • Requires the use of coilovers
  • Requires the use of caster camber plates.
  • While stock control arms can be used with this k-member, it is highly recommended that the QA1 control arms are used. Stock and other brand control arms are not compatible with this k-member.
  • Requires the use of an aftermarket telescoping steering shaft for installation.

Product Note

  • Factory and aftermarket engine mounts may have alignment pins that can cause fitment issues. Removal of the alignment pin might be necessary for correct mating of engine mount to k-member.
  • Clunks, squeaks, and pops can be normal occurrences with coil-over setups
  • Depending on your vehicle, modification of the stock steering shaft or a low-profile steering shaft may be required.


  • Over 50% Lighter Than Stock
  • Improves Suspension Geometry
  • Retains Factory Wheel Base


  • American-Made HSLA Steel
  • Weighs 25lbs
  • Interchangeable Motor Mounts

 What's in the Box

  • (1) Tubular K-Member

QA1 4.6L Tubular K-Member

Dramatically reduce weight on the front of your 1994-2004 Mustang 4.6 with this QA1 tubular K-member! QA1's redesigned K-member is over 50% lighter than your factory K-member, coming in at only 25 pounds! Eliminating this much weight will greatly reduce track times while stiffening up your front end! To go along with the weight savings, QA1's tubular K-member will also improve suspension geometry as well as provide an optimized control arm and steering rack mounting location. All of this is achieved while retaining the factory wheelbase!

QA1 Quality

QA1 designed this K-member to reduce weight, improve header & oil pan clearance, as well as suspension geometry. All of this was completed and built with the highest quality, American-made HSLA steel right here in the USA! By digitally indexing a new, factory K-member, QA1's tubular K-member is a direct bolt-on installation. Their removable engine mounts will support your 4.6 engine, but can easily be changed out for future engine swaps! This will be the last K-member you have to buy!

QA1 Limited Warranty - Click Here

California Residents:
Prop 65 Warning SignWARNING: Cancer and Reproductive Harm-

About This Brand

QA1 specializes in providing performance shock absorbers, carbon fiber driveshafts, suspension, rod ends, spherical bearings, ball joints and other related items to a variety of markets including circle track racing; drag racing; street performance; street rodding; as well as several other industrial markets. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American made shock absorbers and accessories. Experience in value-added global sourcing for aluminum forgings and impact extrusions contributes to their ability to provide the highest quality components at economical prices. With a wide-ranging product line, the ability to meet OEM custom requirements, and economical prices, QA1 has constantly focused on exceeding its customers' expectations. Shop our selection of Mustang and SVT Lightning QA1 suspension components at!
Add to Cart