Benefits
- Replaces Defective Lead Frame
- Houses 6R80 Sensors & Solenoids
- Direct Replacement
Features
- Factory Dimensions/Tolerances
- New Solenoid Connectors
- New Range & OSS Sensors
What's in the Box
- (1) Molded Lead Frame
- (1) Foam Terminal Seal
F-150 Raptor 6R80 Transmission Molded Lead FrameFix the notorious issues that plague 6R80 transmissions in Gen 1 Raptors with this 2011-2014 F-150 Raptor molded lead frame! Located on the valve body in your 6R80 transmission, this molded lead frame (also called a transmission control module connector or conductor plate) fixes several known issues that can cause major problems. From the factory, a design change in 2011 caused a cascading effect that crippled various sensors and solenoids within your 6R80 transmission. This lead to recalls to replace that defective unit with this updated lead frame to better control your 6R80 transmission.
Why replace the 6R80 molded lead frame?Because there are a variety of components within the transmission, you can experience a variety of problems. For starters, the transmission range sensor can fail which causes a no crank no start condition. The solenoid connections are known to collect metal shavings in the terminal pins which start to short the solenoid connections out. One of the other major symptoms that is experienced is caused by the faulty output shaft speed sensor which can cause the vehicle rear end to lock up due to the PCM reading 0 which causes it to think transmission should be in 1st gear during highway speeds. All of this combines to cause some very real problems that need to be addressed. LMR is proud to offer this Ford original replacement to give you the peace of mind that your Ford Raptor 6R80 transmission will be better than new after installation.
Ford Motorcraft Warranty - Click Here