Strange Axle & C-Clip Eliminator Kit
- Significantly Stronger Than Stock
- Induction Hardened Axles
- Eliminates C-Clips
- Uninterrupted Power Transfer
- NHRA Legal
- Made In USA
- 5-Lug 35 Spline Axles
- 1550 Premium Forged Alloy Steel
- 8.10lb 35 Spline Spool
- C-Clip Eliminators w/ Timken Bearings
- 3" Studs
What's in the Box
- (2) 35 Spline Axles
- (2) C-Clip Eliminators
- (1) 35 Spline Spool
- (2) GT Caliper Brackets
- (2) ABS Rings
- (10) 3" Wheel Studs
Drastically improve performance at the drag strip with this 1994-1998 Mustang Strange 8.8" axle, spool, and c-clip eliminator kit! The factory axles are weak and can't hold up to the abuse of drag racing. These Strange alloy axles are induction hardened to create an axle that is much stronger than the factory axles. Strange CNC machines these axles using a modified 1550 premium forged alloy steel in a 35 spline count that withstands an even higher torque and bending load over it's 28 and 31 spline counterparts. Stronger, 3" wheel studs are included to reduce the risk of stud failure as well provide enough thread for wheel spacers. This kit includes 5-Lug, 35 spline axles, 35 spline spool, caliper brackets, and c-clip eliminators.
Strange Steel Spool
This kit replaces your factory differential with an 8.10lb 35 spline spool. This saves a significant amount of weight while increasing strength due to the simplistic design. Both axles will turn at the same speed with an equal amount of uninterrupted force, making it a great choice for drag racing. Because of this it is highly recommended you DO NOT drive it on the street.
Strange C-Clip eliminators are included to keep your Mustang within the rules of drag racing. By eliminating the factory c-clips, your axles mount to the end of the axle housing. If your axle breaks, the entire axle and wheel assembly will stay put instead of rolling down the track. These high quality C-Clip eliminators feature Timken roller bearings that are ideal for constant strip use.
Brake Caliper Adapter Brackets
This kit includes brake caliper brackets to mount your rear brakes to the rear axle. These caliper brackets are constructed with billet aluminum for strength and durability. The brackets in this kit are specific for GT/V6 rear brake calipers.
- The Wheel Studs Are Pre-Installed
- New Carrier Bearings Will Be Needed To Complete This Installation And Can Be Found Here LRS-4221A
- Fits 1994-1998 Mustang w/ 8.8" rear axle
In order to reinstall your ring and pinion, we suggest using M4210C3
Strange Warranty - Click Here