- Capable of 775+ Horsepower
- Bolt On Application
- Light Weight
- Centrifugal Blower
- Satin Finish
- Mandrel Bent Charge Tubes
- 3.60" Drive Pulley
- 7.5 - 8.5 PSI
- 98mm MAF Housing
What's in the Box
- (1) Vortech Supercharger
- (1) Installation Hardware
Instantly increase the horsepower of your 2018-23 Mustang 5.0 with a V-3 JT supercharger kit from Vortech! This Vortech Supercharger is capable of increasing your horsepower to 775+ with the right tune! This system uses a new patented oil control system with a state of the art centrifugal compressor that generates 78% adiabatic efficiency which results in less heat being created. With an easy to bolt application and plug and play connections, this supercharger comes ready to install!
Vortech uses top of the line components to bring you the best quality supercharger for your S550! This system uses a 98mm MAF housing and mandrel bent charge tubes to allow air to freely flow and not be disrupted. The manifold boost pressure is between 7.5 and 8.5 PSI at redline on a stock engine and features a 3.60" drive pulley to help you gain ultimate rev speeds! Finished off in a satin finish this supercharger not only will look good but outperform beyond expectations!
- V-3 Si compressor with 3.60" drive pulley
- Manifold boost pressure: 7.5-8.5 psig @ redline on stock engine
Air inlet assembly includes:
- High-flow roto-molded ducting. Mates to OEM airbox and some aftermarket "CAI" MAF/inlet assemblies
- OEM replacement K&N panel filter
- Silicone sleeves and reducers
- Stainless steel clamps
- PCV and breather hose provisions
- Replacement engine coolant pipe and hose assemblies
- Engine coolant reservoir replacement assembly
- Dual plate supercharger mounting system includes idlers, drive belt and all hardware. Mount features multiple position idler location for a wide range of belt and pulley fits.
Discharge components include:
- High flow air/air charge cooler. 24" x 13" x 3.5" cooler core.
- Mandrel bent 3" and 3.5" aluminum charge tubes for high flow and minimal weight
- Stainless steel clamps
- Silicone sleeves
- 98mm MAF housing configured for "blow-through" use. Integrated air-straightener upstream of the MAF housing.
- Vortech Maxflow Race Bypass Valve with filter
-For higher horsepower, custom tuned installations we recommend a tuner kit
-Does not include fuel pump, fuel injectors or ECU programmer
-Fits 2018-23 Mustang 5.0
This product is intended for off-road use only, and is not legal for use in emission restrictive states. Off-Road Disclaimer
With the addition of a nitrous, turbo, or supercharger kit; custom tuning will be required for your car to run properly and safe.
Vortech Warranty - Click Here