Late Model Restoration is your one-stop shop for all of your Mustang mass air meter needs!
Check our LMR's easy to following guide on how to clean your Mass Air Flow Sensor on your Mustang. Cleaning your Mass Air Flow Sensor is easier than you think!
Rid your Mustang of that speed density air intake setup with our mass air conversion wiring harness to allow the use of a mass air meter!
This bracket not only serves as a replacement for mass air cars from 89-93, but also serves as a replacement for 86-88 speed density cars that are converting to Mass Air and are wanting to install a bracket to complete this conversion properly. In this article and video we are performing the removal and ins...
Mass Air Meters measure the volume of air coming through the intake to determine how much fuel to inject into your engine. Upgrading your Mustang MAF can improve throttle response and horsepower by opening up the diameter of the meter over the stock unit. If upgrading your fuel system in a 1989-1995 Mustang, it is a must to match the calibration of your fuel injectors to the Mustang mass air meter. Otherwise, your engine will not run properly. These meters are calibrated for 19lb, 24lb, 30lb, 36lb, 38lb, 42lb, and larger injectors. With the introduction of the OBD 2 and newer ECUs, the mass air meter can be calibrated with a custom tune rather than a new mass air sensor.
Want to convert your 86-88 Mustang speed density setup to a mass air meter system? Late Model Restoration carries everything you need to get your 5.0L engine switched over to a MAF setup. Our mass air conversion wiring harnesses and sensors will convert your motor quickly! Look no further than Late Model Restoration for all your Mustang mass air meter needs!
