Powered by Mustang Enthusiasts - Call Now (866) 507-3786

How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang

Last Updated 2/3/2021 by Taylor Ward

Learn how to remove & install your 94-04 SN95/New Edge Mustang malfunctioning or broken interior door handles with a factory-style replacement from LMR!

Viewing this install and using the information shared is subject to the terms set forth here - View the LMR Install Instructions Disclaimer.

FOLLOW: how to , removal , installation , sn95 , new edge mustang , interior , door

How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang - How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang

Over time, these inner door handles can become worn out or damaged due to wear and tear. Follow along and we will show you the steps on how to replace these. These should take you about half an hour per side from start to finish.

Tools Needed

  • Assorted Screwdrivers
  • Drill
  • Socket Set
  • Rivet Gun

  • Removal


    1. First, start off by removing the inner door panel.
    2. How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang - How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang


    3. Next, you will need to locate the inner door handle attachment point. The factory will be held in place by a rivet. If so you will need to drill this one out. As you can see here, our handles have been replaced somewhere down the line and are held in place by a bolt and a nut.
    4. How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang - How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang


    5. Once you have the handle-free from the door, you will need to flip this one over and free the cable from the handle. You can do this by pulling away from the base of the handle where the cable meets to free it.
    6. How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang - How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang


    7. Now slip the cable end out.

    Install


    1. Before going back in with your new handle you will need to paint to match your interior. Once your handle is dry, it is time to go back on the car.
    2. How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang - How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang


    3. Start by slipping the cable end into place.
    4. How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang - How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang


    5. Next, secure the cable base into the handle.
    6. How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang - How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang


    7. Now we will need to secure the handle to the door.
    8. How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang - How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang


    9. Insert your rivet through the handle and into the door frame and make sure that everything is sitting flush. Now you can use your rivet gun and set the rivet in place.
    10. How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang - How To Remove & Install SN95/New Edge Interior Door Handle Kit | 94-04 Mustang


    11. Check over your work and verify proper operation, then you can reinstall your moisture barrier and door panel and you are all done!

    Well, everyone, this one is an easy job to do. There is nothing worse than having one of these inner door handles fail, but as you can see, this one is a simple task to get this job done. As always for all things Mustang, keep it right here at LMR.com

1994-04 Mustang Inner Door Handles


About the Video

How To Remove & Install SN95/New Edge Mustang Interior Door Handles

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Published on 2020-10-16
Buy 94-04 Interior Door Handles: http://latemodelres.to/9404InteriorDoorHandles_YouTube

Inner Door Panel Removal: https://youtu.be/YTjRqocKV7w
How To Paint Your Interior: https://youtu.be/OvyiK57uzuo

Replace your 1994-2004 SN95/New Edge Mustang malfunctioning or broken interior door handles with this factory-style replacement kit. This kit is a direct replacement style, all-in-one kit that comes ready for installation with the required rivets for secure fitment and a long life-span. This kit comes in a black finish but these components can be painted for the perfect match in any interior!

Installation Note
We recommend painting these to match your Mustang's interior.

Application
Fits 1994-2004 Ford Mustang

YouTube: https://latemodelres.to/youtube-subscribe
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
Twitter: http://twitter.com/latemodelresto

#LMR #SN95 #NewEdge

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer
Transcript
94-04 Inner Door Handles

How’s it going everyone, Jay here with LMR.com. Today we will be covering the removal and installation of your inner door handles on your 1994-2004 Mustang.


Over time, these inner door handles can become worn out or damaged due to wear and tear. Follow along and we will show you the steps on how to replace these.


First, start off by removing the inner door panel. Check out the link on the description below to show you how this one is done.

Next, you will need to locate the inner door handle attachment point. The factory will be held in place by a rivet. If so you will need to drill this one out. As you can see here, our handles have been replaced somewhere down the line and are held in place by a bolt and a nut.

Once you have the handle free from the door, you will need to flip this one over and free the cable from the handle. You can do this by pulling away from the base of the handle where the cable meets to free it.

Now slip the cable end out.


Before going back in with your new handle you will need to paint to match your interior. If you are not familiar with painting these interior parts, check out the link in the description below to show you how this is done.


Once your handle is dry, it is time to go back on the car.


Start by slipping the cable end into place.

Next, secure the cable base into the handle.

Now we will need to secure the handle to the door.

Insert your rivet through the handle and into the door frame and make sure that everything is sitting flush. Now you can use your rivet gun and set the rivet in place.


Check over your work and verify proper operation, then you can reinstall your moisture barrier and door panel and you are all done.


Well everyone, this one is an easy job to do. There is nothing worse than having one of these inner door handles fail, but as you can see, this one is a simple task to get this job done.

These should take you about a half an hour per side from start to finish. Some of your tools will include, assorted screwdrivers, a drill, socket set, and a rivet gun.


If you enjoyed this video, give us a thumbs up. Make sure that you are subscribed to our channel and turn on notifications so you can be up to date on all of your new tech content like this one. As always, make sure to keep it here with the real enthusiasts at LMR.com.