LMR will be closing early at 12pm CST Friday, October 22nd in preparation for our 2021 Cruise-In Event. We look forward to seeing you at the show! We will resume normal business hours on Monday, October 25th.
2005-2014 Mustang BMR Panhard Bar
Center the rear end on your 2005-2014 S197 Mustang with a BMR Adjustable Pan Hard Bar from LMR.com. The Panhard Bar is responsible for locating the rear end side-to-side in the chassis. Factory Mustang Panhard Bars are made with small diameter tubing and rubber bushings that allow deflection under load and are not adjustable. BMR Mustang Panhard Bars are all made from larger diameter 1.25", heavy wall DOM tubing and utilize either grease-able polyurethane bushings or HD spherical bearings by QA1. The adjustable versions use left-hand and right-hand thread to allow easy "on-car" adjustment. BMR's CNC machined adjusters are made from 4130 Chromoly and have rolled threads. All rod end spacers are 304 stainless. You won't find better quality pieces.
A Must Have Mod!
By nature, a Mustang Panhard Bar will alter rear end position as ride height changes. This makes it necessary to use an Adjustable Panhard Bar when lowering your vehicle as it allows you to re-center the rear end. Adjustable Panhard Bars also become a "must-have" part if you are trying to fit the widest tires possible in the wheel well.
Fits 2005-2014 Ford Mustangs
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2021-07-07 In this video from LMR, we break down how to replace the panhard bar on 2005-2014 S197 Mustangs. Replacing the panhard bar is a common practice when lowering your S197 Mustang. This video gives you the needed knowledge of removing your old worn-out unit to either upgrade or reinstall with a stock replacement.
How To Adjust 05-14 Panhard Bar: https://youtu.be/BLZyoDGX8qw
0:00 | Intro 0:31 | Tools Needed 0:39 | Lift Vehicle & Locate Panhard Bar 0:45 | Remove 18mm Bolt From The Driver's Side First Then The Passenger Side 0:58 | Remove The Panhard Bar 1:01 | Inspect Area For Any Additional Replacements 1:14 | Reverse Removal Steps 1:42 | Final Thoughts
Published on 2021-08-02 In this video from LMR, we break down how to adjust the panhard bar on 2005-2014 S197 Mustangs. Adjusting the panhard bar is a common practice once you're installed your adjustable panhard bar on your lowered S197 Mustang. This video gives you the needed knowledge of adjusting your new panhard bar.
Shop Mustang Panhard Bars: https://latemodelres.to/MustangPanhardBars_YouTube Shop Panhard Bar Relocation Bracket: https://latemodelres.to/PanhardBarBracket_YouTube
How To Remove/Install 05-14 Panhard Bar: https://youtu.be/cf_Rjacu1Fw
0:00 | Intro 0:40 | Tools Needed 0:50 | Lift Vehicle & Locate Panhard Bar 0:57 | Align Panhard Bar 1:21 | Check For Interference 1:39 | Adjust Panhard Bar 2:50 | Final Thoughts
BMR fabrication is one of the top manufactures of Mustang suspension components that both improve performance and increase traction. With a full line of control arms, panhard bars, shock tower braces, k-members, anti-roll bar kits, and drive shaft safety loops, you can have your muscle car handling better than ever. All BMR components are engineered to fit with precision, hold up to the extreme demands of racing, and give you the edge over your competition!