This product cannot be sold or shipped to the state of California. More Details
Ford Mustang - 1996, 1997, 1998
Sub Models: GT
Installation Note
These camshafts require custom computer tuning to maintain drivability and for the best power.
These camshafts require new valve springs! You can use Comp CCA-2611316 valve springs and CCA-79216 retainers, or the complete Trick Flow Upgrade kit TFS-2500500.
Your factory sprocket bolts will not fit these cams. You will need new ARP camshaft bolts for proper installation.
Maximize engine performance in your 1996-1998 SN95 Mustang with this Comp Cams Xtreme Energy XE268H camshaft kit! Comp Cams Xtreme Energy camshafts are built to take advantage of the latest cam technology, to provide maximum performance. Manufactured to produce a wide power curve over the entire RPM range, this camshaft kit provides excellent power gains without sacrificing any low-end horsepower or torque. Comp Cam has designed these Xtreme Energy cams to operate between 1,600-5,600 RPM by utilizing a .500" lift for increased engine performance. Thanks to the aggressive cam lobe profile, these cams have a noticeable idle note while providing better throttle response and more power than equivalent cams from other manufacturers. Increase low to mid-range torque and horsepower without sacrificing drivability with these Comp Cams Xtreme Energy Camshafts!
Cam Specs
Advertised Intake Duration: 268
Advertised Exhaust Duration: 274
Intake Duration at .050 Inch Lift: 230
Exhaust Duration at .050 Inch Lift: 236
Intake Valve Lift: 0.50
Exhaust Valve Lift: 0.50
Lobe Separation (Degrees): 114
Camshaft Gear Attachment: 1-Bolt
RPM Operating Range: 1,600-5,600
Application
Fits 1996-1998 Mustang GT
This product is intended for off-road use only, and is not legal for use in emission restrictive states. Off-Road Disclaimer
Valve Spring Upgrade
LMR recommends upgrading the valve springs with any aftermarket camshafts.
Comp Cams - The Absolute Leader In Valve Train Performance
COMP Cams - The Absolute Leader In Valve Train Performance
COMP Cams manufactures truly superior hydraulic and solid flat tappet, hydraulic and mechanical roller, and overhead camshafts for Latemodel Mustangs and Lightnings. Comp Cams are designed and manufactured using cutting-edge technology and the finest engineering in the industry.
Whether your engine is naturally aspirated, run nitrous, a supercharger or a turbo, Comp Cams make more horsepower than any other. Looking for that ultimate hard-hitting Mustang idle? Check out the aggressive new ThumprCams.
Match Comp Cams camshafts up with their competition-grade lifters, valve springs, timing sets, and other supporting components, and you’ll experience the ultimate in race-winning reliability!
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
