Benefits
- Improve handling
- Less Wheelwell Gap
- Excellent Ride Quality
Features
- Approx 1.1"-1.0" drop
- Black Finish
- Eibach Quality
What's in the Box
- (1) Set Of Eibach Pro Kit Lowering Springs
Lowered Ride Height
Get rid of the ugly wheel gap on your S550 with the help of these 2015-2023 Mustang V6 or Ecoboost Eibach Pro-Kit lowering springs! These springs lower your S550 on average by approximately 1.1" in the front and 1.0" in the rear. The Pro-Kit springs feature a specific rate for firmer ride quality and a moderate increase in spring rate. This kit can be used with factory shocks and struts but upgrading to performance shocks & struts is recommended for maximum performance benefit.
Increased Suspension Performance
Every Eibach Pro-Kit is designed and tested by a suspension engineer and performance driving professional - to offer aggressive good looks and high-performance handling - the best of both worlds without compromising safety or ride quality. By using this proprietary, specific rate spring design, the Pro-Kit provides the ultimate balance that will take your passion for driving to a whole new level.
Ride Height Difference
- Front: Approx 1.1"
- Rear: Approx 1.0"
Spring Rates
- Front - 201 lbs
- Rear - 800 lbs
Front Specs
- OE rate: 28 N/mm (160 lbs/in)
- PRO-KIT progressive rate: 35 - 55 N/mm (200 - 314 lbs/in)
- Bump-stop: New Eibach Bump Stop
- OE wheel center to fender: 397 mm (15.6 in)
- PRO-KIT wheel center to fender: 370 mm (14.5 in)
- PRO-KIT can be aligned to OE Specs: Yes
Front Alignment:
- OE Camber = -0.8 deg (+/-0.8 deg)
- OE Caster = 7.2 deg (+/-0.8 deg)
- OE Toe = 0.0 deg (+/-0.2 deg)
- PRO-KIT Camber = -1.0 deg
- PRO-KIT Caster = 7.5 deg
- PRO-KIT Toe = 0.2 deg
Approximate installation time: 2 hrs
Rear Specs
- OE rate: 117 N/mm (668 lbs/in)
- PRO-KIT progressive rate: 140 - 160 N/mm (800 - 914 lbs/in)
- Bump-stop: New Eibach Bump Stop
- OE wheel center to fender: 385 mm (15.1 in)
- PRO-KIT wheel center to fender: 360 mm (14.2 in)
- PRO-KIT can be aligned to OE specs: Yes
Rear Alignment:
- OE Camber = -1.2 (+/-0.8 deg)
- OE Toe = 0.1 deg. (+/-0.2 deg)
- PRO-KIT Camber = -1.4 deg
- PRO-KIT Toe = 0.2 deg
Approximate installation time: 2 hrs
Application
- 2015-2023 Mustang V6 and Ecoboost - Coupe & Convertible
Eibach Warranty - Click Here