- Real-Time Self-Learning Fuel Strategies
- Built-In Boost & Nitrous Control
- Plug & Play Harnesses
- On-Board Diagnostics
- Pre-Loaded With Base Maps For Gen 1 Coyote
- High Impedance Injector Drivers
- Customizable Gauge Display
- Built-In 1 Bar MAP Sensor
Terminator X Max Kit - Gen 1 Coyote - 4R70w - 550-1510
Take control of your Gen 1 5.0 Coyote engine with Ti-VCT and transform the power, efficiency, and drivability with Holley's Terminator X Max Kit! Don't settle for a factory control pack with the limited tuning ability and no self-learning capability when you can have complete control of your engine, self-learning fuel strategies, and the proven, race-winning technology of Holley's EFI at a budget-friendly price! The Terminator X Max features real-time fuel learning, high impedance injector drivers, an integrated 1 bar MAP sensor, and 4 programmable inputs and outputs. Holley manages to fully integrate Ford's factory Twin Independent Variable Camshaft timing (Ti-VCT) with the Coyote Ti-VCT control modules included with this Holley Terminator Max system. The X max also comes with an integrated electronic transmission controller that works on the 1998+ 4R70W transmission. The added inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. The Terminator X comes fully loaded with base maps for your Gen 1 Coyote engine to get you out of the garage and on the road/track fast! The 3.5" touch screen LCD handheld contains an easy-to-use calibration wizard, as well as tuning and gauges, and display functions. Holley EFI's industry-leading, easy-to-use software is provided to allow full laptop access for advanced tuning. Whether you are building a budget beater or a boosted race car, Holley EFI's Terminator X has the features and technology you need at a price that won't break the bank!
- The harness included in this kit was meticulously measured to be routed through the firewall, imitating the factory wiring harness.
- This is a NO LAPTOP REQUIRED kit! Simply enter the information about your specific engine combination into the wizard on the 3.5" handheld touchscreen and the ECU will build a tune map around your specifications the more the car is driven! No need to be an EFI or tuning expert!
- Integrated electronic transmission controller that works on the 4R70W transmission.
Full List of Features:
- Plug and play engine control for Ford 5.0L Coyote with Ti-VCT (Twin Independent Variable Camshaft timing)
- Plug and play compatible with Holley EFI accessories – Analog gauges, shift lights, modules, and both 6.86” and 12.3” Pro Dash
- EV6 injector harness included
- High impedance injector drivers power Holley EFI and most stock injectors - Injector support chart found in instructions (will not support low impedance injectors)
- Included Bosch LSU 4.9 wideband O2 sensors for accurate readings and precise tuning control
- Built-in 1998+ 4R70W Transmission Controller
- 1998+ Ford AODE/4R70W Transmission Control Harness (Terminator X Max Only)
- Built-in 1bar MAP (manifold absolute pressure) sensor included - For Boosted applications – internal MAP sensor can be disabled and utilize external MAP sensor harness (kit includes a terminated connector for seamless installation)
- Vacuum hose adapters included - (1/8”, ¼”, and 3/16” sizes)
- 4 inputs – 12v, Ground, 5v, and frequency for items like pressure sensors, activation triggers, nitrous activation, or trans brake
- Boost Control – boost vs. time, boost vs. gear, boost vs. RPM, boost vs. speed, and boost safeties
- Nitrous Control – channels for wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR (Air/Fuel Ratio)
- Advanced Tables – ( 4x 1D tables, 1x 1D gear table, 4x 2D table, and 1x 2D gear tables) for nearly unlimited table configuration options
- On-board diagnostic LEDS - ECU power, engine run, TPS calibration, cam signal, and more! Identify critical engine parameters at a glance
- 3.5” touchscreen handheld included - Internal data-logging, custom gauge display, and calibration wizard allow quick building bases tunes for any Domestic V8 engine
- Compact ECU (Engine Control Unit) – At only 7.45” x 4.1” x 1.66” the compact packaging allows mounting virtually anywhere (XMAX ECU = 9.6” x 4.1” x 1.66”). REMINDER: diagnostic LEDs must face up!
- FREE EFI Tuning software – For complete control of your Terminator X power plant
- Plug and play compatible with more Holley EFI accessories such as; analog-style gauges, shift lights, various modules, 12.3" digital dash support!
WHAT'S IN THE BOX?
(1) Terminator X ECU
(1) 3.5" Touchscreen LCD Handheld
(1) ECU Mounting Bracket
(1) Ti-VCT Controller and Harness
(1) Primary Engine Harness
(1) Power Harness
(1) Injector Harness
(1) Drive-By-Wire Harness
(1) 98+ 4R70w Transmission Harness
(2) Ignition Modules
(1) EV6 Injector Harness
(1) Bosch LSU 4.9 Wideband Oxygen Sensor
(1) Built-In 1 Bar Manifold Absolute Pressure Sensor
(1) Vacuum Hose Adapter Kit
Tuning & Software Note
- Holley provides the Terminator X Tuning Software for free to completely control your power plant!
- The Tuning Software Lists Injector Data For Varying Applications.
Holley Warranty - Click Here