Benefits
- Replaces All Body Side Moldings
- Restores Exterior Styling
- Easy Installation
Features
- Molded Urethane Construction
- Recessed Stripe C-Channel
- Pre-Installed 3M Double-Sided Tape
What's in the Box
- (1) LH Front Of Fender Molding
- (1) RH Front Of Fender Molding
- (1) LH Rear Of Fender Molding
- (1) RH Rear Of Fender Molding
- (1) LH Door Molding
- (1) RH Door Molding
- (1) LH Front Of Quarter Panel Molding
- (1) RH Front Of Quarter Panel Molding
- (1) LH Rear Of Quarter Panel Molding
- (1) RH Rear Of Quarter Panel Molding
- (2) Adhesion Promoter Packets
Mustang Master Body Side Molding Kit
Restore the exterior of your Fox Mustang with this Daniel Carpenter Reproductions 1979-1984 Mustang 10-piece body side molding kit! These moldings run along each side of the body and attach to the fenders, doors, and quarter panels. The best way to get a quality paint job is to take off these moldings to get proper paint coverage throughout. These moldings are usually worn from exterior elements and often don't survive the removal process. DCR compiled this complete body molding kit to properly restore the look of your Mustang back to showroom new.
Daniel Carpenter Reproductions Quality
This high quality molding kit features a molded urethane construction that arrives ready for prep and paint. The recessed C-Channel for the stripe accepts the several different stripes offered in this year range. Automotive grade 3M double sided tape is pre-installed to secure the molding to your Fox after paint. The steel reinforcement bands were intentionally left out to prevent kinks that show through the molding. You won't find a better molding kit for your Fox restoration project!
Fitment Note
Due to the use of several different bumpers over this year range, the profile of the molding may not match up perfectly with the molding of the bumper. This is evident in Ford original moldings as well as these reproduction moldings.
Molding Note
Due to the manufacturing process, scuff marks may be apparent. These marks must be sanded and prepped before painting and installation.
Application
Fits 1979-1984 Mustang
Disclaimer
Test fitment and paint preparation of this part are mandatory BEFORE painting. Neither LMR nor the product manufacturer is responsible for fitment or finish issues after the paint has been applied. Professional preparation, installation, and painting are highly recommended.
On urethane and fiberglass body parts, due to the manufacturing process, it is common to see irregular surface patterns, sanding, buffing, and mold release marks on products. These marks are normal and will not be present once the product has been sanded, prepped, and painted to match your vehicle.
Daniel Carpenter Restoration Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
