Includes Inner Door Belt Weatherstrip, Speaker Grilles & Map Pockets
What's in the Box
(1) Driver Side Door Panel
(1) Passenger Side Door Panel
1990-1993 Mustang Deluxe Mustang Door Panels
This pair of fully assembled Mustang door panels includes new inner door belt weatherstrips, door lock knob grommets, speakers grilles and map pockets. No assembly required, all you have to do is take them out of the box and install them on your Mustang using door panel clips.
- 90-93 style, but will also fit 87-89
- Fits Mustang hatchback and coupe
- For Mustangs with power windows only
Door Panels = Key Interior Component
As far as Mustang interiors go there are only a few components that you will see or touch on a regular basis: carpet, seats, dash/console, and door panels. Out of this list door panels get overlooked probably more than anything else, but when you consider how your Mustang's door panel affects your overall driving experience you start to wonder why. During normal driving your left arm will rest on the arm rest that is secured to the door panel. Not only is the arm rest a handy place to set your elbow, but it also houses your window and door lock switches considering that your Mustang has power windows and locks.
The door panel is not just there for convenience, it also serves an important purpose: blocking out excessive road noise that comes from the door cavity. Door cavities are a breeding ground for squeaks, rattles, knocks, and other annoying sounds. If your Mustang's door panel is ill fitting, not properly installed, damaged or missing these sounds will find their way into your interior and eventually drive you nuts! Do yourself a favor and pick up a set of these brand new, fully assembled, deluxe door panels. Install them with the brand new door panel clips and drive your Mustang in peace! Your ears will thank you!
- Door panels are shipped without holes cut in the vinyl for the arm rest, window regulator, switches or door handle. Precut holes are cut into the backer board for these accessories. When cutting the vinyl, remove as little vinyl material as needed to gain the proper clearance on the door itself. Cutting the vinyl to match the holes in the backing board can result unsatisfactory finish. Pictures are for reference only.
I bought the deluxe door panels because I wanted something higher quality and less work than the economy door panels. After receiving the correct door panels I noticed that you cannot just install the door panels. All of the holes for the armrests and need to be cut out of the vinyl and padding. This isn't a huge deal, but it takes time. The vinyl appears to be decent quality, however the overall quality leaves a lot to be desired. The seam across the top was placed lower than the factory panels, which causes the door handle bezel to overlap the seam. Also, the mounting taps for the lock pin grommets are clearly visible from the top. The speaker grills are gray plastic and painted black which can be scratched easily. My recommendation is to spend a few more dollars buy the TMI door panels. Had I not already cut the holes for the armrests, I would have returned these.
Was this review helpful to you?
Matt L. on
"No assembly required, all you have to do is take them out of the box and install them on your Mustang using the included door panel clips."
The above statement is misleading, no holes are present in the door panel. You are required to cut holes for door handles and arm rests. The arm rest has a chalk line to help guide your cut for half of it and for the door handle you are on your own. The panel looks great once installed.