Mustang Rear of Quarter Panel Molding
- Replaces Wrinkled Or Cracked Molding
- Exact Reproduction
- Restores Exterior
- Molded Urethane Construction
- Recessed Stripe C-Channel
- Pre-Installed 3M Double-Sided Tape
What's in the Box
- (1) RH Rear Of Quarter Panel Molding
Restore the look of your Fox Body with this passenger side 1979-1984 Mustang rear of quarter panel molding from 5.0 Resto! This molding usually becomes wrinkled during removal, and is unable to be straightened back out due to the metal banding inside; thus replacing it is the only option to get a straight molding. 5.0 Resto offers this passenger side rear of quarter panel molding that replaces your broken original to properly restore the look of your Mustang back to showroom new.
This high quality passenger side molding features a molded urethane construction that's ready for prep and paint. The new molding has the specific recessed C-channel for the accent stripe running from the front of the molding to the rear. The front section of the molding has a curved edge that matches the shape of the quarter panel wheel opening, while the rear section has a straight edge that faces the rear bumper after installation. Automotive grade 3M double sided tape is pre-installed to secure the molding to your Fox after paint. The steel reinforcement bands were intentionally left out to prevent kinks that show through the molding. You won't find a better quarter panel molding for your Fox restoration project!
5.0 Resto Solutions
5.0 Resto is dedicated to the preservation of the Fox Body by providing solution-based products and content to help you restore your Mustang. This rear of quarter panel molding is a direct replacement for your original to ensure your Mustang is restored to its factory condition. Be sure to check out 5.0 Resto's installation video and article below to help with the installation of this quarter panel molding.
Due to the use of several different bumpers over this year range, the profile of the molding may not match up perfectly with the molding of the bumper. This is evident in Ford original moldings as well as these reproduction moldings.
Due to the manufacturing process, scuff marks may be apparent. These marks must be sanded and prepped before painting and installation.
Fits 1979-1984 Mustang
Test fitment of this part is mandatory BEFORE painting. Neither LMR nor the product manufacturer is responsible for fitment issues after the paint has been applied. Professional installation and painting are highly recommended.
5.0 Resto Products Limited Warranty - Click Here