Renew the drivetrain in your 5.0 equipped 1982-1993 Mustang by replacing the worn clutch fork with this Ford OE unit! The clutch fork plays an important role by retaining the throwout bearing in place and pushing it onto the clutch pressure plate fingers. Featuring the correct recess for the pivot stud and tension springs for the throwout bearing, this OE Ford clutch fork is the perfect replacement to get your Mustang back on the road!
Due to being a raw finished surface, surface rust can be expected.
Fits 1982-1993 Mustang 5.0 w/ SROD or T5 Transmission
Mustang Throwout Bearing & Clutch Fork Install (79-04 Fox Body & SN95)
How To Remove Mustang T5 Transmission (1982-2004 5.0L, 3.8L, 2.3L)
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-08-14 No transmission and clutch install is complete until you replace all the clutch accessory parts: clutch fork, throwout bearing, pilot bearing, pivot stud and clutch cable. We often get questions about clutch and clutch accessory installs. One of the most common questions we get is how do you properly install the throw-out bearing (release bearing) and clutch fork?
Follow along in the video as Jmac shows you the basic installation procedures to properly install your new clutch fork and throwout bearing. He also gives some proper grease tips for installing the clutch cable and pivot stud.
This install video will help you get your Fox Body, SN95 and New Edge Mustang back on the road. Be sure to check out our full line of Mustang clutch parts that include: 5.0Resto, Ford Racing, Steeda, Ram, BBK and more!
Published on 2018-08-01 Removing the T5 transmission from your Fox Body or SN95 Mustang is needed whenever you need to access vital drivetrain and engine components. These components include the clutch and pressure plate, clutch fork, throw out bearing, fly wheel, rear main seal, and other various parts.
This video covers the core steps in the removal process. The work is performed on a 1991 Fox Body race car. Depending on the year of your Mustang, the removal of the few interior pieces will slightly differ.
Ford Motor Company Genuine Parts, Motorcraft® Parts and Ford and Motorcraft Remanufactured Parts are all excellent choices when it comes to performance, longevity and value for your Mustang or SVT Lightning. And they’re all backed by a Ford Motor Company limited parts warranty*, so you know their parts you use are going to perform like they should. Put the same parts on your Lighting & Mustang that came from the factory!