Benefits
- Great For Resto-Mod & Custom Build Projects
- Ford Performance Quality
- 480 Horsepower & 415 ftlb Torque!
Features
- Dual 80mm Throttle Bodies
- Hypereutectic Aluminum Pistons
- Sintered Steel Connecting Rods
- Forged Steel Crankshaft
What's in the Box
- (1) Ford Performance 5.0 Crate Engine Assembly
- (1) Manual Transmission Engine Harness
- (1) Dual Mass Flywheel
Ford Performance Gen 4 Coyote Crate Engine - ManualDrop-in horsepower 480hp with this Ford Performance Gen 4 Coyote crate engine with a manual harness that is perfect for your muscle car! Now, you can harness all of the power of the new 2024 Coyote Mustang in your own build. This 5.0 motor packs a ground-pounding 480 horsepower @ 7,150 rpm and 415 ft.-lb. of Torque @ 4,900 rpm (with premium fuel). This Gen 4 engine features an aluminum block utilizing a heightened compression ratio with cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength. Ford designed the Gen 4 Coyote intake with a dual 80mm throttle body. This leads to more airflow for increased horsepower over previous-generation Coyote engines! This engine will be great for use in a street rod, or resto-mod builds using Ford Performance's controls pack.
Engine Specs:- 480 Horsepower @ 7,150 rpm
- 415 ft.-lb. of Torque @ 4,900 rpm
- 12.0:1 Compression ratio
- Bore 93mm x stroke 92.7mm
- Hypereutectic aluminum pistons
- Sintered steel connecting rods as used on BOSS 302 Mustang
- Forged steel crankshaft
- Aluminum block w/ plasma transferred wire arc spray weld liner coating
- Longer, 12 mm head bolts for higher clamp load
- 9.5 qt capacity steel oil pan
- Tuned composite intake manifold provides efficient air delivery and weight savings.
- Twin 80 mm single bore "drive by wire" electronic throttle bodies with variable runner control.
- High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing
- Includes engine harness and dual mass flywheel. For engine equipped with automatic flex plate, see M-6007-M50DAUTO.
- Engine mount bosses and bell housing mount pattern common to 5.0L modular engines.
- Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY.
- Engine weight: 453 lbs. without front accessory drive components
Ford Performance Racing Parts "Packs" and Component Parts Limited Warranty - Click Here
Ford Performance Racing Parts - NO WARRANTY - Click Here
Ford Performance Racing Parts Crate Engine Limited Warranty - Click Here