1985-93 Mustang Ford Racing Air Conditioner (A/C Delete) Eliminator Bracket - 5.0L by Ford Performance

This was perfect, although Ford did not give us instructions...(LATEMODEL-Maybe put up a Quick Video/PDF Instr Sheet for us?).This bracket bolted up and fit fine, with help from a video on youtube-Search Ford Racing A/C delete and it'll pop up.All bolts etc, were fine, be sure to Anti-Seize them! The P/S pump went up and it cleans up Engine bay nicely. The P/S pump hoses were plenty long enough-no probs there...As Far as the Belt- I included a diagram in my Photos, my belt, and a friends for No A/C, No Smog as pictured was 74" I could NOT get a 73.5 on my car. It would not fit even with the tensioner out of the way. The 74" was perfect and it left 2" between Tensioner and Water Pump-DO NOT ROUTE AS FACTORY DECAL INDICATES-IT WILL RUB!!! route as follows; From alternator down to crank pulley,around and up over water pump, over to P/S pump and back to Alternator. This will work and there are diagrams on the web as well. Hope This helps somebody...oh, and don't worry, As long as You have the SMOOTH side on Water pump Pulley-No matter HOW you route it-will make the water pump turn in proper direction (All FoxBody 5.0 have reverse rotation Water Pumps, Facing the motor the Water Pump SHOULD turn to the Left-Counter Clockwise-The opposite direction of the Crank-This IS Correct and WILL be fine)

I only started putting money into my nearly factory fox about a month ago, and after having troubles with my build on my previous Cobra Mustang I knew id have to do it right from the start. Gotta cut the fat off the motor first! And ford racing never disappoints. I bypassed my smog completely while installing the P/S relocation so if you want to do what I did make sure to buy a 74" belt!

I drive a 1986 mustang gt convertible, and when i got it from the last owner the A/C had no R12 in it. Additionally, the condenser had two coats of paint primer on it (i guess masking it of wasn't a thought) so i chose to delete it. This kit arrived on time and fit perfectly with no modification necessary. Directions would have helped but i was able to figure everything out. I give it 5 starts for fitment, fast shipping and OE quality parts.

I purchased this item to discard the A/C unit, since there's no need in the Bay Area. Brackets fit perfectly and it's a quick way to lose 30lbs off the front nose. But primarily I like this item since it helped clean my engine bay. Thanks again 50Resto!!!

I got this product two weeks ago and it fit perfect. Very satisfied! I use this company for a lot of needs.