Due to high order volume, please allow an additional 1-2 days for shipping. Thank you for your patience.
Limits Movement Of Rear Axle
Reinforces Rear Suspension
3/4" Rod Ends
What's in the Box
(1) Upper Panhard Rod
(1) Mounting Bracket
(1) Panhard Rod
All Needed Hardware
Maximum Motorsports Mustang Panhard Bar
The Maximum Motorsports Panhard Bar eliminates the 1999-2004 Mustang's unstable and unpredictable behavior while cornering near its limit. This feeling is caused by the rear of the car steering itself without any input from the driver. Rear end steering is caused by the sideways movement of the rear axle. In addition, the Mustang upper control arms are at about a 45-degree angle from the direction of the cornering load. Some binding in these arms is induced during cornering as one arm enters into compression and the other enters into tension.
Do NOT use urethane in the upper arms to improve the side to side motion of the axle. Because of the three-dimensional movement of the upper arms, severe binding will be induced as the suspension moves--with or without a Panhard bar. This effect may not be evident in a drag-only car, but if you plan to drive the car on the street at all, we do not recommend urethane in the upper arms.
If you need new factory upper control arms, we have them at this link - Click Here.
- Fits 1999-2004 Ford Mustangs
See what our customers have to say about this product! Check out customer reviews.
Maximum Motorsports is well respected as a leading developer of suspension systems and performance parts for your Mustang or Lightning. Established in 1992, the team at MM has spent countless hours researching and developing the highest quality suspension components for 1979-Present Mustangs and 1993-Present SVT Lightnings. Maximum Motorsports has strived to produce lightweight, direct replacement suspension parts to get your vehicle handling, launching, and cornering better than ever. Shop LatemodelRestoration.com for performance panhard bars, k-members, subframe connectors, steering racks, caster/camber plates. chassis braces, control arms, roll bars, wheel spacers, and other tubular suspension parts.